SciTechPlus

Innovative pour point , small size stand-alone equipment acc. to ASTM D 97 - IP 15 - ISO 3016 with touch-screen interface, Ethernet, USB and serial port.

• Enamel finished steel-aluminium case, benchtop version.
• Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods.
• One glass sample container conform to ASTM, IP, DIN and ISO standard methods.
•  Two models, one for jacket temperatures till -60°C (suitable for tests at standard temperature of 48, 24, 0, -18, -33 and -51°C) and one till -80°C (suitable also for -69°C tests) with +/- 0.2°C regulation accuracy. Both units are equipped with a patent-pending integrated cooling system based on thermoelectric cooling: in this way we have reduced dimensions, weight, power consumption, noise and heat dissipation making moreover the equipment more reliable since single-stage cooling compressors require much less maintenance if compared with cascade double-stage ones.
• Micro Thermal detection of pour point. Motorized arm that lifts and tilts the sample container out of the jacket at programmable intervals: mimic ASTM D 97.
• Temperature sensor: Pt100 RTD. Accuracy of temperature reading: +/- 0.1°C.
• 8.4” touch screen interface  that permits to introduce the analytical data, control the test and display the results. Tests can be run acc. to ASTM/ISO methods or to user defined methods. Software includes diagnose and calibration tools with all modern QC routines.
• Two USB, one RS-232 and one Ethernet connector for connecting to printers and network even through wireless dongles.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 700 W power consumption (PP-60) and 1000 W (PP-80).
• Dimensions and weights (l x w x h) pour point : 350x700x700 mm, 40 kg (PP-60) and 400x750x750 mm, 50 kg (PP-80).

Innovative, small size stand-alone equipment acc. to ASTM D 2500 - IP 219 - ISO 3015 with touch-screen interface, Ethernet, USB and serial port.Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods.

• Enamel finished steel-aluminium case, benchtop version.
• Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods.
• One glass sample container with mirror conform to ASTM, IP, DIN and ISO standard methods.
• Two models, one for jacket temperatures till -60°C (suitable for tests at standard temperature of 48, 24, 0, -18, -33 and -51°C) and one till -80°C (suitable also for -69°C tests) with +/- 0.2°C regulation accuracy. Both units are equipped with a patent-pending integrated cooling system based on thermoelectric cooling: in this way we have reduced dimensions, weight, power consumption, noise and heat dissipation making moreover the equipment more reliable since single-stage cooling compressors require much less maintenance if compared with cascade double-stage ones.
• Optical detection of cloud point through IR sensor.
• Temperature sensor: Pt100 RTD. Accuracy of temperature reading: +/- 0.1°C.
• 8.4 inches touch screen interface  that permits to introduce the analytical data, control the test and display the results. Tests can be run acc. to ASTM/IP/ISO/DIN methods or to user defined methods. Software includes diagnose and calibration tools with all modern QC routines.
• Two USB, one RS-232 and one Ethernet connector for connecting to printers and network even through wireless pendrives.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 700 W power supply (CP-60) and 1000 W (CP-80). Dimensions and weights (l x w x h): 350x700x700 mm, 40 kg (CP-60) and 400x750x750 mm, 50 kg (CP-80).

The apparatus consists of a benchtop case containing the cooling compressor with the cooling jacket and supporting the head and the control box. Stirring of the sample is provided by an electric motor adjusted for 75 strokes/min and connected to a coil. Temperature is acquired by means of a Pt100 RTD. The apparatus needs a PC to operate. A software running under Windows Xp/Vista/7 permits to perform the analysis fully automatically, store data and print reports.

• Enamel finished steel case, benchtop version.
• Double stage cooling compressor (for jacket temperatures down to –85°C).
• Electrically powered sample support: it permits to lift the sample out of the jacket and to insert it at the beginning of the test.
• Electric sample stirrer with coil. Stirrer speed: 75 strokes/min.
• Pt100 RTD for sample temperature recording: complete with cable and connector.
• Software running under Windows Xp/Vista/7 that permits to introduce the analytical data, controls the test, displays the results and allows printouts. Software includes calibration tools with all modern QC control and record.
• English written user manual.
• CE marked.
• For 220 V/50 Hz connections: 1600 W power consumption.
• Dimensions (l x w x h): 700 x 600 x 900 mm. Weight: 120 kg. approx.
• PC not included.

AD1177-110        Apparatus for the determination of Freezing Point of antifreeze liquids for PC connection

 

ACCESSORIES

PC01                    Desktop PC

PRN01                 Printer

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1177-C00        Glass sample container, 200 ml

Specifications may vary without notice.

The apparatus is supplied bare without glassware (if any), accessories and consumables.

Innovative CFPP, small size stand-alone equipment acc. to ASTM D 6371, IP 309, EN 116 with touch-screen interface, Ethernet, USB and serial port.

• Enamel finished steel-aluminiumcase, benchtop version.
• Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods. - One glass sample container conform to ASTM, IP, DIN and ISO standard methods.
• Two models, one for jacket temperatures till -60°C (suitable for tests at standard temperature of -34 and -51°C) and one till -80°C (suitable also for -67°C tests) with +/- 0.2°C regulation accuracy. Both units are equipped with a patent-pending integrated cooling system based on thermoelectric cooling: in this way we have reduced dimensions, weight, power consumption, noise and heat dissipation making moreover the equipment more reliable since single-stage cooling compressors require much less maintenance if compared with cascade double-stage ones.
• Automatic determination of CFPP : sample temperature decrease is monitored by the software and vacuum applied every 1°C. Two IR photocells permit to measure CFPP during aspiration or release.
• Temperature sensor: Pt100 RTD. Accuracy of temperature reading: +/- 0.1°C. - Filtration unit composed by 20 ml pipette, filter holder and 45 microns filter. - 3-way solenoid valve for vacuum controlled by the software. Vacuum unit required if not already available.
• 8.4” touch screen interface that permits to introduce the analytical data, control the test and display the results. Tests can be run acc. to ASTM/IP/EN methods or to user defined methods. Software includes diagnose and calibration tools with all modern QC routines.
• Two USB, one RS-232 and one Ethernet connector for connecting to printers and network even through wireless dongles. - English written user manual. CE marked. - For 220 V/50 Hz connections: 500 W power consumption.
• Dimensions and weights (l x w x h): 350x700x700 mm, 40 kg (CFPP-60) and 400x750x750 mm, 50 kg (CFPP-80).

Innovative, small size stand-alone equipment acc. to ASTM D 97 and D 2500 - IP 15 and 219 - ISO 3015 and 3016 with touch-screen interface, Ethernet, USB and serial port.

• Enamel finished steel-aluminium case, benchtop version.
• Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods.
• One glass sample container with mirror conform to ASTM, IP, DIN and ISO standard methods.
• Two models, one for jacket temperatures till -60°C (suitable for tests at standard temperature of 48, 24, 0, -18, -33 and -51°C) and one till -80°C (suitable also for -69°C tests) with +/- 0.2°C regulation accuracy. Both units are equipped with a patent-pending integrated cooling system based on thermoelectric cooling: in this way we have reduced dimensions, weight, power consumption, noise and heat dissipation making moreover the equipment more reliable since single-stage cooling compressors require much less maintenance if compared with cascade double-stage ones.
• Optical detection of cloud point based on continuous reflected IR light percentage . Accuracy of temperature reading: +/- 0.1°C.
• Micro Thermal detection of pour point. Motorized arm that lifts and tilts the sample container out of the jacket at programmable intervals: mimic ASTM D 97. Accuracy of temperature reading: +/- 0.1°C.
• 8.4” touch screen interface  that permits to introduce the analytical data, control the test and display the results. Tests can be run acc. to ASTM/ISO methods or to user defined methods. Software includes diagnose and calibration tools with all modern QC routines.
• Two USB, one RS-232 and one Ethernet connector for connecting to printers and network even through wireless dongles.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 700 W power consumption (CPPP-60) and 1000 W (CPPP-80).
• Dimensions and weights (l x w x h): 350x700x700 mm, 40 kg (CPPP-60) and 400x750x750 mm, 50 kg (CPPP-80).

Innovative, small size stand-alone equipment acc. to ASTM D 2386 with touch-screen interface, Ethernet, USB and serial port.Insulated metal jacket conform to ASTM, IP, DIN and ISO standard methods.

• Enamel finished steel-aluminium case, benchtop version.
• One glass sample container conform to ASTM, IP, DIN and ISO standard methods.
• Thermally insulated jacket capable to reach -80°C in less than 30 min equipped with a patent-pending integrated cooling system based on thermoelectric cooling: this technology has permitted to reduce dimensions, weight, power consumption, noise and heat dissipation making the equipment more reliable since single-stage cooling compressors require much less maintenance if compared to cascade double-stage ones.
• Optical detection of freezing point through IR sensor: sample is cooled until crystals appear and then heated until their disappearance to determine the result.
• Temperature sensor: Pt100 RTD. Accuracy of temperature reading: +/- 0.1°C.
• Electric stirrer 75 rpm complete with brass stirring coil and mechanism.
• 8.4 inches touch screen interface  that permits to introduce the analytical data, control the test and display the results. Tests can be run acc. to ASTM/IP/ISO/DIN methods or to user defined methods. Software includes diagnose and calibration tools with all modern QC routines.
• Two USB, one RS-232 and one Ethernet connector for connecting to printers and network even through wireless pendrives.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 1000 W power supply.
• Dimensions and weights (l x w x h): 400 x 750 x 750 mm, 50 kg.

The apparatus consists of a benchtop case which houses the electro-mechanical components and a miniature PC with touch screen. A software running under Windows permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity. The instrument is equipped with a sensor for barometric pressure for the correction of the results towards atmospheric pressure. Enamel finished steel and aluminium case, benchtop version. Chromium-plated brass heating bath with exactly the same dimensions reported in the method for manual apparatus. Brass oil cup and lid with insulating handle. Jacket for glass-coated Pt100 RTD in the cover (n°1 Pt100 with cable and quick connector supplied with the instrument). Electric stirrer that stops during flame dipping. Stirrer speed: 30 rpm. Other speeds can be selected for custom methods. Automatic flame dipping: provision for gas or electric ignitor. Electric heating. A plate heater placed below the bath provide the correct heating rate of 1 to 1.5°C/min. Two hose connectors permit to link the apparatus to a water source or a cryostat: thermally insulated pipes. Cryostat not included. Ignition system: gas or electric ignitors can be used. When gas ignitor is in use, the electric one can be used as pilot flame. PC based controller with 6” color touch-screen interface. IP 65 front protection. Software characteristics: selection of the test method or setup of up to 40 custom methods, introduction of the test parameters through the touch screen, possibility to change the setpoint during the test, “search” option (for sample with unknown flash point), selectable cooling time, storage of up to 400 test results and possibility to retrieve and print test reports, LAN connectivity, calibration and diagnostic routines. LAN connectivity: the apparatus can be connected directly to a hub to become part of the user network: a software supplied with the apparatus permits to retrieve data also from another PC. Flash point detection through ionization sensor: the apparatus also provides an alert if a flash has occurred at the first flame application, warning that the test result is not reliable. The flash point temperature remains shown on the display until the operator’s acknowledgement. Safety device is provided to stop the analyzer if a flash has not been detected at a temperature 30°C over the preset value. This safety device could be excluded to perform "search" tests. English written user manual. Dimensions (l x w x h): mm 280 x 480 x 650. Weight: kg 20 approx. For 220 V/50 Hz connections: 500 W power consumption. CE marked. ACCESSORIES IP0170-A00         Cryostat for temperatures down to –30°C PRN01                 Printer CAL001                PT100 simulator CAL002                Officially certified PT100 simulator CONSUMABLES IP0170-C00         Oil cup IP0170-C01         Lid IP0170-C02         PT100 probe IP0170-C03         Electric ignitor IP0170-C04         Gas ignitor Specifications may vary without notice. The apparatus is supplied bare without glassware (if any), accessories and consumables.

The apparatus is a benchtop model which houses the mechanical components and a miniature PC with touch screen. A software running under Windows Xp permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity. The instrument is equipped with a sensor for the correction of the results towards atmospheric pressure.

• Enamel finished steel case, benchtop version.
• Electric heating plate.
• Brass oil cup with insulating handle (n°1 Pt100 with cable and quick connector supplied with the instrument).
• Electronically driven mechanism that passes the flame over the cup at the correct intervals for the correct amount of time: electric pilot flames in conjunction with a solenoid valve on the gas line automatically light the flame and relight in case it extinguishes during the test.
• Second generation ionization flash sensor.
• Flame extinguisher: automatically extinguishes the flame covering the cup in case a fire is detected or after fire point detection.
• PC based controller with touch-screen interface.
• Software characteristics: selection of the ASTM/IP test method or setup of up to 40 custom methods, introduction of the test parameters through the touch screen, possibility to change the setpoint during the test, “search” option (for sample with unknown flash point), selectable cooling time, storage of up to 400 test results and possibility to retrieve and print test reports, LAN connectivity, calibration and diagnostic routines.
• LAN connectivity: the apparatus can be connected directly to a hub to become part of the user network: a software supplied with the apparatus permits to retrieve data also from another PC.
• Flash and fire point detection through ionization sensor: the apparatus also provides an alert if a flash has occurred at the first flame application, warning that the test result is not reliable. The flash point temperature remains shown on the display until the operator’s acknowledgement.
• Safety device is provided to stop the analyzer if a flash has not been detected at a temperature 30°C over the preset value or at a temperature of 400°C. This safety device could be excluded to perform "search" tests.
• English written user manual. Microsoft Windows original license.
• Dimensions (l x w x h): mm 360 x 460 x 680. Weight: kg 36 approx.
• For 220 V/50 Hz connections: 600 W power consumption.
• CE marked.

 AD0092-600        Apparatus

ACCESSORIES

AD0092-A00        Printer

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0092-C00        Oil cup

AD0092-C02        Pt100 probe

AD0092-C03        Electric ignitor

Specifications may vary without notice.

The apparatus is supplied bare without glassware (if any), accessories and consumables.

The apparatus consists of a benchtop case hosting the electrically heated bath. The apparatus is equipped with a 30 rpm electric stirrer with a separate switch   

• Enamel finished steel case.
• Double wall brass heating bath with hole for water filling.
• Electric heater with voltage regulator.
• Pt100 probe for sample temperature acquisition.
• Digital display for sample temperature, 0.1°C accuracy.
• One brass cup with handle.
• One lid with flame exposure device, thermometer well, gas ignitor and pilot flame.
• 30 rpm electric stirrer with separate switch.
• English written user manual.
• For 220 V/50 Hz connection: 500 W power consumption.
• Dimensions (l x w x h): 360 x 360 x 400 mm. Weight: 12 kg approximately.
• CE approved.

IP0170-110     Apparatus ACCESSORIES CAL001          PT100 simulator CAL002          Officially certified PT100 simulator CONSUMABLES IP0170-C00     Oil cup IP0170-C01     Lid IP0170-C02     PT100 probe IP0170-C04     Gas ignitor Specifications may vary without notice. The apparatus is supplied bare without glassware (if any), accessories and consumables.

The apparatus is a benchtop model which houses the air bath stove and the stirrer motor: differently from other apparatus on the market, our instrument is equipped with a fan that cools down the stove quickly after the test.

• Enamel finished benchtop steel case.
• Cast iron stove, electrically heated with stainless steel external shield.
• Voltage regulator with dial on the front panel.
• Pt100 probe for sample temperature acquisition.
• Digital display for sample temperature, 0.1°C accuracy.
• Oil cup, brass, complete with filling mark. Insulating handle.
• Lid with flame dipping mechanism.
• Electric stirrer, 100 or 250 rpm.
• Electric fan for a quick cooling of the stove at the end of the test.
• English written user manual.
• For 220V/50 Hz connections, 900 W power consumption.
• Dimensions (l x w x h): mm 240 x 330 x 450. Weight: 10 kg approximately.
• CE approved.

AD0093-120        Apparatus (for ASTM D 93 method A, B and C)

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0093-C00        Oil cup

AD0093-C01        Lid

AD0093-C02        PT100 probe

AD0093-C04        Gas ignitor

TA009C-N00       ASTM 9C thermometer (-5/+110°C)

TA010C-N00       ASTM 10C thermometer (+90/+370°C)

Specifications may vary without notice.

The apparatus is supplied bare without glassware (if any), accessories and consumables.

The apparatus consists of a benchtop steel case supporting the electrical heater, the gas ignitor and the thermometer support.

• Enamel finished benchtop steel case.
• Electric heating plate with stainless steel support.
• Electronic temperature regulator with dial on the front panel.
• Oil cup, brass with insulating handle.
• Gas ignitor, stainless steel, complete with valve and with support that permits to pass the flame over the cup at the correct distance.
• Pt100 probe for temperature acquisition.
• Support for Pt100 probe.
• Digital display for sample temperature, 0.1°C accuracy.
• English written user manual.
• For 220 V/50 Hz connections, 500 W power consumption.
• Dimensions (l x w x h): mm 360 x 360 x 300. Weight: 8 kg approximately.
• CE approved.

AD0092-110        Apparatus with digital display, 0.1°C accuracy (complete with PT100 RTD with cable and connector)

 

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0092-C00        Oil cup

AD0092-C01        PT100 probe

TA011C-N00       ASTM 11C thermometer (-6°C/+400°C)

Specifications may vary without notice.

The apparatus is supplied bare without glassware (if any), accessories and consumables.

The apparatus consists of a frame supporting two Pyrex jars (one for 24 and one for 93.5°C) and a control box with all the electronics. The equipment permits to perform the analysis automatically: it’s enough to pour the sample in the cylinder and to insert the cylinder in the jar. By pressing a button on the 8.4” touch screen display, the test sequence will be started: after a selectable waiting time, the prescribed 470 ml of air is blown into the sample in 5 minutes: an audible alarm alerts the user 30 sec. prior to the end of the blowing time. The apparatus permits also to record test data, diagnose and calibrate temperature and flow sensors.

• Powder coated steel frame supporting two Pyrex jars, one for tests at 24 and one for tests at 93.5°C.
• Aluminium covers, each with two holes for the graduate test cylinders: locking clamps to hold the cylinders in position and thermometer jacket for ASTM 12C thermometer on each cover.
• Electrical bath stirrer on the jar cover.
• Stainless steel heaters.
• Two stainless steel cooling coils in the 24°C jar: one permits to maintain 24°C in the jar by circulating tap water and one permits to cool down the air used in sequence II.
• Two or four electronic mass flow controllers with 0-200 ml/min scale and 0.1% F.S. precision.
• Electronic controller that permits to run the test completely automatically: selectable waiting, blowing and alarm time. The controller provides also to maintain the jars at the prescribed temperatures with 0.1°C accuracy. 8.4” touch screen display. Calibration, diagnostic and data storage routines. Temperature measuring elements: PT100 RTD.
• Operating range: from ambient to 100°C.
• One Ethernet, two USB and one serial port.
• Safety transparent shield surrounding 93.5°C bath.
• Safety devices against overheating and low level on both jars.
• Easy access control box: it can be removed in case of malfunctionment for easy transportation.
• English written user's guide and installation instructions.
• For 220V / 50Hz connections. Power consumption 2500 W.
• Dimensions (l x w x h): mm 1050 x 460 x 720. Weight: kg 55 approx.
• CE marked.

AD0892-400  Apparatus with two flow controllers (for 2 simultaneous tests) AD0892-410  Apparatus with four flow controllers (for 4 simultaneous tests) ACCESSORIES AD0892-A00  Wet test meter AD0892-A01  Officially certified wet test meter AD0892-A10  Air pump AD0892-A03  Glass drying tower CAL001  PT100 simulator CAL003  Official Certificate for Pt100 simulator CONSUMABLES AD0892-C00  Graduate pyrex glass cylinder AD0892-C01  Rubber stopper with air inlet and outlet AD0892-C02  Norton certified spherical Alundum gas diffuser stone AD0892-C03  Mott certified stainless steel cylindrical gas diffuser TA012C-N00  ASTM 12C thermometer (-20°C/+102°C)

The apparatus consists of a steel frame supporting the control box, the jar and an electric lift that permits to move the sample stirrer up and down in the test funnel. The stirrer assembly can also be removed from the unit for cleaning. Stirrer speed is continuously showed on a digital tachometer.

• Borosilicate glass jar 500 mm depth, mounted on a enamel finished benchtop steel frame.
• Anodized aluminium cover with four-position turntable for the insertion of four graduated separatory funnels: a positioning device permits to locate the funnels exactly below the stirrer and avoid glassware breaking due to positioning mistakes.
• Stainless steel heaters and electrical bath stirrer.
• Variable speed electrical sample stirrer mounted on a electrical device which permits to lift and lower the stirrer easily in the sample. The stirrer assembly is also removable for cleaning.
• Digital tachometer in the control box which continuously shows the stirrer speed.
• Electromechanical timer which automatically stops the sample stirrer after 5 minutes of stirring.
• Microprocessor thermoregulator with built-in digital thermometer 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 90°C.
• Safety devices against overheating and low-level.
• Easy access control box placed on the right side of the apparatus containing all the electronic and electrical components: aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 1800 W.
• Dimensions (l x w x h): mm 500 x 460 x 1100 approx. Weight: kg 50 approx.
• CE marked.

AD2711-100        Apparatus

ACCESSORIES

AD2711-A00        Table support for four funnels

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD2711-C00        500 ml graduated funnel, Pyrex glass

The apparatus consists of a benchtop frame supporting the 1000 mm U-tube manometer, a regulating valve, 1 m of 8 mm inside diameter brass tubing, a 250 ml cylinder and a 500 ml filtering flask with rubber stopper and outlet tube. The apparatus can be used to check both cylindrical (Mott) and spherical (Norton) diffusers for maximum pore diameter and permeability.

• Enamel finished benchtop frame.
• Maximum pore diameter determination assembly consisting in a electrically powered piston that permits to raise the pressure at the prescribed rate of 50 Pa/min inside the diffuser when immersed in water or propan-2-ol. This device has been adopted since it is practically impossible to control the correct increase of pressure with a valve (50 mm of water column/min is a very small increase).
• One precision regulating valve for the permeability test. It permits to regulate the air pressure at 250 Pa in the diffuser circuit when the diffuser is connected to the wet test meter.
• One 1000 ml U-tube manometer mounted on a wooden support with adjustable mm scale.
• One 250 ml graduate cylinder.
• One 500 ml filtering flask with rubber stopper and air outlet tube . Hose connector for connection to the wet test meter.
• English written user manual.
• CE marked.
• For 220V / 50Hz connection. Power consumption: 100 W approx.
• Dimensions (l x w x h): 500 x 300 x 1200 mm approx. Weight: 10 kg approx.
• Wet test meter not included.

AD0892-300        Apparatus

 

ACCESSORIES

AD0892-A00        Wet test meter

AD0892-A01        Official certified wet test meter

The apparatus consists of a steel frame supporting a Pyrex jar with a cover that allows to insert and fix two cylinders without necessity of any steel ring to avoid floatation, two high precision flowmeters and a control box containing all the electronics.

• Steel frame supporting one Pyrex jar, suitable for tests at 24 and at 93.5°C.
• Aluminium cover with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
• Electrical bath stirrer on the jar cover.
• Stainless steel heaters.
• Stainless steel cooling coils: when connected to a cold water source, it permits to keep the bath temperature (24°C) prescribed in ASTM D 892 sequence 1.
• High precision variable area flowmeters complete with needle valve, supports and diffuser connections. Individual calibration certificates.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy. Probe: Pt100 RTD.
• Safety devices against overheating and low level.
• Easy access control box.
• English written user's guide and installation instructions.
• For 220 V/50 Hz connections. Power consumption 2200 W.
• Dimensions (l x w x h): mm 450 x 420 x 680. Weight: kg 30 approx.
• CE marked.
• Version with mass flow controller and software also available.

AD0892-100        Single-unit apparatus

ACCESSORIES

AD0892-A00        Wet test meter

AD0892-A01        Officially certified wet test meter

AD0892-A02        Air pump

AD0892-A03        Glass drying tower

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0892-C00        Graduate pyrex glass cylinder

AD0892-C01        Rubber stopper with air inlet and outlet

AD0892-C02        Norton spherical Alundum gas diffuser stone (certified for permeability and pore size)

AD0892-C03        Mott stainless steel cylindrical gas diffuser (certified for permeability and pore size)

TA012C-N00       ASTM 12C thermometer (-20°C/+102°C)

Specifications may vary without notice.

The apparatus is supplied bare without glassware, diffusers, accessories and consumables.

The apparatus consists of a steel case containing a Pyrex jar with an insulated cover that allows to insert two cylinders without necessity of any steel ring to avoid floatation, two high precision flowmeters and a control box containing all the electronics.

• Enamel finished steel case containing one Pyrex jar, suitable for tests up to 160°C. Double-walled window on the front.
• Insulated cover with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
• Electric stirrer.
• Stainless steel heaters.
• Two high-precision variable area flowmeters complete with needle valve, supports and diffuser connections. Individual calibration certificates.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy. Probe: Pt100 RTD.
• Safety devices against overheating and low level.
• Easy access control box.
• English written user's guide and installation instructions.
• For 230V/50 Hz connections. Power consumption 2200 W.
• Dimensions (l x w x h): mm 680 x 540 x 800. Weight: kg 35 approx.
• CE marked.
• Version with mass flow controller and software also available.

AD6082-100        Apparatus

ACCESSORIES

AD6082-A00        Wet test meter

AD6082-A01        Air pump

AD6082-A02        Glass drying tower

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD6082-C00        Graduate Pyrex glass cylinder

AD6082-C01        Rubber stopper with air inlet and outlet tubes

AD6082-C02        Mott stainless steel cylindrical gas diffuser

TA041C-N00       ASTM 41C thermometer (+98°C/+152°C)

Specifications may vary without notice.

The Foaming test apparatus consists of a steel frame supporting two Pyrex jars with a cover that allows to insert and fix two cylinders without necessity of any steel ring to avoid floatation, four high precision flowmeters and a control box containing all the electronics.

• Steel frame supporting two Pyrex jars, one for tests at 24 and one for tests at 93.5°C.
• Aluminium covers with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
• Electrical bath stirrer on the jar cover.
• Stainless steel heaters.
• Stainless steel cooling coils: when connected to a cold water source, it permits to keep the bath temperature (24°C) prescribed in ASTM D 892 sequence 1.
• High precision variable area flowmeters complete with needle valves, supports and diffuser connections. Individual calibration certificates.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy (one for each bath). Probe: Pt100 RTD.
• Safety devices against overheating and low level on both jars.
• Easy access control box.
• English written user's guide and installation instructions.
• For 220V / 50Hz connections. Power consumption 2200 W.
• Dimensions (l x w x h): mm 1050 x 420 x 680. Weight: kg 60 approx.
• CE marked.
• Version with mass flow controller and software also available.

AD0892-200        Twin-unit apparatus

ACCESSORIES Foaming test

AD0892-A00        Wet test meter

AD0892-A01        Officially certified wet test meter

AD0892-A02        Air pump

AD0892-A03        Glass drying tower

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES Foaming test

AD0892-C00        Graduate pyrex glass cylinder

AD0892-C01        Rubber stopper with air inlet and outlet

AD0892-C02        Norton spherical Alundum gas diffuser stone (certified for permeability and pore size)

AD0892-C03        Mott stainless steel cylindrical gas diffuser (certified for permeability and pore size)

TA012C-N00       ASTM 12C thermometer (-20°C/+102°C)

Specifications may vary without notice.

The Foaming test apparatus is supplied bare without glassware, diffusers, accessories and consumables.

The apparatus consists of a steel frame supporting the control box, the jar and an electric lift that permits to move the stirrer blade up and down in the test cylinder. The speed of the stirrer is continuously showed on a digital tachometer.

• Borosilicate glass jar, 250 mm deep, mounted on a enamel finished benchtop steel frame.
• Anodized aluminium cover with six-position turntable for the insertion of the cylinders containing the samples: a positioning device permits to locate the cylinders exactly below the blade of the sample stirrer, avoiding breakings due to positioning mistakes.
• Electric lifting device for the stirrer support.
• Electric bath stirrer.
• Stainless steel heater.
• Electric sample stirrer.
• Digital tachometer which continuously shows the stirrer speed.
• Electronic timer which automatically stops the sample stirrer after 5 minutes stirring.
• Microprocessor controlled thermoregulator, PID action with built-in digital display 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C.
• Working range: from ambient to 100°C.
• Safety devices against overheating and low-level.
• Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 800 W.
• Dimensions (l x w x h): mm 500 x 460 x 960 approx. Weight: kg 40 approx.
• CE marked.

AD1401-100        Apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1401-C00        Graduate cylinder, Pyrex glass

TA009C-N00       ASTM 9C thermometer (-5°C/+110°C)

TA019C-N00       ASTM 19C thermometer (+49°C/+57°C)

TA021C-N00       ASTM 21C thermometer (+79°C/+87°C)

The apparatus consists of a benchtop steel case containing an aluminium thermostatic block with a series of holes for the introduction of the oxidation cells, a support for the flowmeters and a water dispenser for the condenser refrigeration.

• Enamel finished benchtop steel case.
• Aluminium block bath with  wells for test tubes.
• Stainless steel electric heaters.
• Microprocessor thermoregulator with built-in temperature display, 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 300 °C.
• Safety device against overheating.
• Easy access control box placed on the right side of the apparatus and containing all the electronics and electrical parts. Aluminium control panel with english written indications.
• Oxygen inlet manifold with high precision variable area flowmeters with calibration certificate. Individual needle valves for regulating oxygen flow at 5  ± 0.5 l/h
• Water inlet manifold with valve connections for the mushroom condensers.
• Water outlet manifold.
• English written user manual.
• For connection to 220V/50Hz. Power consumption 2000 W.
• CE marked.
• Four, six, eight and twelve-place units available.
• Version with mass flow controller and software also available.

F53084-100         Four-place unit. Dimensions (l x w x h): 640 x 430 x 1000 mm. Weight: 90 kg

F53084-110         Six-place unit. Dimensions (l x w x h): 760 x 430 x 1000 mm. Weight: 110 kg

F53084-120         Eight-place unit. Dimensions (l x w x h): 640 x 490 x 1000 mm. Weight: 130 kg

F53084-130         Twelve-place unit. Dimensions (l x w x h): 760 x 430 x 1000 mm. Weight: 160 kg

ACCESSORIES  

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

F53084-C00        Test tube

F53084-C01        Allihn condenser

F53084-C02        Oxygen delivery tube

F53084-C03        Set of four copper plates

F53084-C04        Set of four mild carbon steel plates

F53084-C05        Set of four aluminium alloy plates

F53084-C06        Set of four magnesium alloy plates

F53084-C07        Set of four cadmium plated steel plates

F53084-C08        Set of four silver plates

F53084-C09        Set of four solid cadmium plates (non standard)

F53084-C10        Set of four titanium plates (non standard)

F53084-C11        Pack of 10 sheets of abrasive paper 100 grit

F53084-C12        Pack of 10 sheets of abrasive paper 150 grit

F53084-C13        Pack of 10 sheets of abrasive paper 240 grit

F53084-C14        Abrasive powder, 0.5 kg

• Enamel finished aluminium and steel case, benchtop version.
• Dry block heater, two, four or six-place.
• 8.4” touch screen color interface that permits to set block temperature, start/stop tests, enter sample data, diagnose and calibrate temperature and pressure sensor. Temperature digital display with 0.1°C accuracy and +/- 0.1°C regulation accuracy connected to Pt100 RTD.  Selectable kPa/psi pressure indicators with 0.1 kPa/psi accuracy: high precision electronic pressure sensors 0 to 2000 kPa scale with 0.1% f.s. accuracy.
• Working range: from ambient to 120°C. Regulation accuracy: ± 0.1°C.
• Stainless steel cartridge heaters, SSR controlled.
• Independent safety device against overheating.
• Oxygen distributor with gage and flexible tube with quick connects for rapid filling of the vessels.
• User friendly graphical software complete with diagnose and calibration routine.
• N° 2 USB ports, n° 1 RS-232 interface and n° 1 Ethernet port on the back panel for the connection to printers or laboratory network.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 2000 W max power consumption.

The apparatus consists of a benchtop case containing an aluminium block and the electronics: a touch screen interface on the front permits to control the equipment. Temperature and pressure data are graphically shown and can be retrieved or printed: the software comprehends also a diagnostic and calibration routine. Vessels are equipped with a pressure transducer and a quick connect cable for the connection to the instrument: an oxygen line consisting of a flexible tube with valve and gage permits loading operations. 

• Enamel finished aluminium and steel case, benchtop version.
• Dry block heater, two, four or six-place.
• 8.4” touch screen color interface that permits to set block temperature, start/stop tests, enter sample data, diagnose and calibrate temperature and pressure sensor. Temperature digital display with 0.1°C accuracy and +/- 0.1°C regulation accuracy connected to Pt100 RTD.  Selectable kPa/psi pressure indicators with 0.1 kPa/psi accuracy: high precision electronic pressure sensors 0 to 2000 kPa scale with 0.1% f.s. accuracy.
• Working range: from ambient to 120°C. Regulation accuracy: ± 0.1°C.
• Stainless steel cartridge heaters, SSR controlled.
• Independent safety device against overheating.
• Oxygen distributor with gage and flexible tube with quick connects for rapid filling of the vessels.
• User friendly graphical software complete with diagnose and calibration routine.
• N° 2 USB ports, n° 1 RS-232 interface and n° 1 Ethernet port on the back panel for the connection to printers or laboratory network.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 2000 W max power consumption.

AD0942-600   Apparatus for two vessels, aluminium block. Dimensions: 600 x 760 x 770 mm. Weight: 80 kg. AD0942-610   Apparatus for four vessels, aluminium block. Dimensions: 600 x 760 x 770 mm. Weight: 110kg. AD0942-620   Apparatus for six vessels, aluminium block. Dimensions: 650 x 760 x 770 mm. Weight: 130kg.   ACCESSORIES AD0942-A00        Oxidation vessel AD0942-A01        Stainless steel dish holder PRN01                 Printer CAL001               PT100 simulator CAL003               Official Certificate for Pt100 simulator     CONSUMABLES AD0942-C00       Gasket for vessel AD0942-C01       Glass sample container TA022C-N00       ASTM 22C thermometer (+95°C/+103°C)

The apparatus consists of a benchtop steel case containing an aluminium thermostatic block with the holes for the introduction of the oxidation cells, a support for the flowmeters and a water dispenser for the condensers refrigeration.

• Enamel finished benchtop steel case.
• Aluminium block bath with wells for test tubes, 48 mm diameter and 365 mm depth.
• Stainless steel heaters.
• Microprocessor thermoregulator with built-in temperature display, 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 100 °C.
• Safety device against overheating.
• Easy access control box placed on the right side of the apparatus and containing all the electronics and electrical parts. Aluminium control panel with english written indications.
• Oxygen inlet manifold with high precision flowmeters with calibration certificate. Individual needle valves for regulating oxygen flow at 3 l/h ± 0.1 l/h
• Water inlet manifold with valve connections for the mushroom condensers.
• Water outlet manifold.
• English written user manual.
• For connection to 220V/50Hz. Power consumption 2000 W.
• CE marked.
• Four, six, eight and twelve-place units available.
• Version with mass flow controller and software also available.

AD2274-100        Four-place unit. Dimensions (l x w x h): 760 x 500 x 960 mm. Weight: 90 kg

AD2274-110        Six-place unit. Dimensions (l x w x h): 910 x 500 x 960 mm. Weight: 100 kg

AD2274-120        Eight-place unit. Dimensions (l x w x h): 850 x 550 x 960 mm. Weight: 110 kg

AD2274-130        Twelve-place unit. Dimensions (l x w x h): 1000 x 550 x 960 mm. Weight: 130 kg

ACCESSORIES  

AD2274-A00        Apparatus for filterable insolubles

AD2274-A01        Pack of 100 filters

AD2274-A02        Vacuum flask 500 ml

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

 

CONSUMABLES

AD2274-C00        Test tube

AD2274-C01        Mushroom condenser

AD2274-C02        Oxygen delivery tube

TA040C-N00       ASTM 40C thermometer (+72°C/+126°C)

The apparatus consists of a benchtop steel case containing an aluminium thermostatic block with a series of holes for the introduction of the oxidation cells, a support for the flowmeters and a water dispenser for the condenser refrigeration.

• Enamel finished benchtop steel case.
• Aluminium block bath with  wells for test tubes, 48 mm diameter  and 365 mm depth.
• Stainless steel electric heaters.
• Microprocessor thermoregulator with built-in temperature display, 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 100 °C.
• Safety device against overheating.
• Easy access control box placed on the right side of the apparatus and containing all the electronics and electrical parts. Aluminium control panel with english written indications.
• Oxygen inlet manifold with high precision flowmeters with calibration certificate. Individual needle valves for regulating oxygen flow at 3 l/h ± 0.1 l/h
• Water inlet manifold with valve connections for the mushroom condensers.
• Water outlet manifold.
• n° 1 thermometer bracket.
• English written user manual.
• For connection to 220V/50Hz. Power consumption 2000 W.
• CE marked.
• Four, six, eight and twelve-place units available.
• Version with mass flow controllers and software also available.

 

AD0943-100        Four-place unit. Dimensions (l x w x h): 640 x 430 x 1000 mm. Weight: 90 kg

AD0943-110        Six-place unit. Dimensions (l x w x h): 760 x 430 x 1000 mm. Weight: 110 kg

AD0943-120        Eight-place unit. Dimensions (l x w x h): 640 x 490 x 1000 mm. Weight: 130 kg

AD0943-130        Twelve-place unit. Dimensions (l x w x h): 760 x 430 x 1000 mm. Weight: 160 kg

ACCESSORIES  

AD0943-A00        Winding fixture

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0943-C00        Test tube

AD0943-C01        Mushroom condenser

AD0943-C02        Oxygen delivery tube

AD0943-C03        Cell thermometer

AD0943-C04        Syringe sampling tube

AD0943-C05        Methacrylate sampling tube holder

AD0943-C06        Sampling tube spacer

AD0943-C07        Catalyst coil

AD0943-C08        Steel wire,  10 m

AD0943-C09        Copper wire, 10 m

TA040C-N00       ASTM 40C thermometer (+72°C/+126°C)

Specifications may vary without notice.

The apparatus consists of a benchtop steel case hosting a dry bath, 4, 6, 8 or 12 positions: the instrument is equipped with individual variable area flowmeters for each position. The advantage of the aluminium block bath consists in the elimination of smelling oil baths and toxic fumes. Besides, the glassware remains clean and not slippery as with oil baths, reducing the risks of incidental breakings.

• Enamel finished benchtop steel case.
• Aluminium block bath with jackets 27 mm diameter and 140 mm height for oxidation tubes.
• Stainless steel heaters.
• High efficiency thermal insulation.
• Microprocessor thermoregulator, PID action with built-in digital display 0.1°C accuracy. Probe: Pt100 RTD For working temperature from ambient to 220°C ± 0.1°C.
• Safety device against overheating.
• Easy access control box containing all the electronics. Anodized aluminium control panel with English written indications.
• For 220 V/50 Hz connection. Power consumption: 1500 W.
• English written user manual.
• CE marked.
• Without glassware and flowmeters: appropriate flowmeter rack should be selected from the table in accessories section.
• Glassware support to run tests acc. to CEI 10.8, CEI/IEC 1125, EN 61125 IP 48, 280, 306, 307, EN 61125 also available.
• Software for flow control included in the digital flowmeter racks.

AD2440-200        Four-place apparatus.

AD2440-210        Six-place apparatus.

AD2440-220        Eight-place apparatus.

AD2440-230        Twelve-place apparatus.

ACCESSORIES

AD2440-A00      Rack with four high precision flowmeters with precision valve at inlet, 0 to 20 l/h air, 150 mm scale (IP 280)

AD2440-A01      Rack with six flowmeters as above

AD2440-A02      Rack with eight flowmeters as above

AD2440-A03      Rack with twelve flowmeters as above

AD2440-A04      Rack with four high precision flowmeters with precision valve at inlet, 0 to 1.6 l/h oxygen, 150 mm scale (CEI  10.8, CEI/IEC 1125 (A + B), EN 61125 (A + B), IP 48, 306, 307

AD2440-A05      Rack with six flowmeters as above

AD2440-A06      Rack with eight flowmeters as above

AD2440-A07      Rack with twelve flowmeters as above

AD2440-A10      Adsorption tube support for tests acc. to CEI 10.8, CEI/IEC 1125, EN 61125, IP 48, 280, 306, 307

AD2440-A20      Rack with four high precision digital flowmeters with software, 0 to 21 l/h air (IP 280)

AD2440-A21      Rack with six digital flowmeters as above

AD2440-A22      Rack with eight digital flowmeters as above

   AD2440-A23      Rack with twelve digital flowmeters as above

AD2440-A24      Rack with four high precision digital flowmeters with software, 0 to 1.8 l/h oxygen, (CEI 10.8, CEI/IEC 1125 (A + B), EN 61125 (A + B), IP 48, 306, 307)

AD2440-A25      Rack with six digital flowmeters as above

AD2440-A26      Rack with eight digital flowmeters as above

AD2440-A27      Rack with twelve digital flowmeters as above

CAL001              PT100 simulator

CAL002              Officially certified PT100 simulator

 

CONSUMABLES

AD2440-C00      Oxidation tube with Drechsel head

AD2440-C01      Adsorption tube with Drechsel head

AD2440-C02      Set of 12 copper coils for tests acc. to ASTM D 2440

AD2440-C03      Set of 12 copper coils for tests acc. to IP 306 and IP 307

AD2440-C04      Set of 12 copper coils for tests acc. to CEI/IEC 1125 (method A) and EN 61125 (method A)

AD2440-C05      Set of 12 copper coils for tests acc. to CEI/IEC 1125 (method B) and EN 61125 (method B)

Specifications may vary without notice.

The apparatus RPVOT / TFOUT Turbine oils, consists of a benchtop case hosting a stainless steel tank with the rotating supports for two vessels: however, up to two units can be connected to a PC, realising a four-unit apparatus. Rotating heads with electronic pressure transducer are mounted on the vessels. The apparatus is connected to a PC where a software running under Windows acquires pressure from the vessels and plots them on a graph on the screen allowing data retrieval and report printout (printer supplied as option) at the end of the test. The apparatus can be equipped with a desktop PC or can be connected to a user-supplied PC.

• Enamel finished steel case, benchtop version.
• Stainless steel tank. Capacity: 70 liters.
• Stainless steel top cover.
• One support rack for the vessels.
• Electric stirrer to ensure temperature uniformity.
• Microprocessor controlled thermoregulator with PID action and built-in digital display 0.1 °C accuracy. Probe: Pt100 RTD. Regulation accuracy: ± 0.1°C.
• Working range: from ambient to 170°C.
• Stainless steel heaters, SSR controlled.
• Independent motor for each vessel, inverter controlled.
• Safety devices against overheating and low level.
• Signal conditioning board: it provides to transform the signals coming from the vessels into the RS-232C serial protocol making the apparatus connectable to a PC through serial port.
• Software running under Windows Xp/Vista/7 that shows on separate graphs the pressure data coming from the vessels and the temperature of the heating bath. Data are stored on the hard disk in .TXT file format and can be retrieved, compared and printed. Diagnostic and calibration routines permits to accurately verify and calibrate temperature, pressure and rotation speed.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 4000 W power consumption.

 

AD2272-100       Apparatus. Dimensions: 750 x 750 x 980 mm. Weight: 150 kg

ACCESSORIES RPVOT / TFOUT Turbine oils

AD2272-A00       Rotating vessel, AISI 316 stainless steel

AD2272-A01      Table support with swivelling castors

PC01                   Desktop PC

PRN01                Printer

CAL001               PT100 simulator

CAL002               Officially certified PT100 simulator

 

CONSUMABLES RPVOT / TFOUT Turbine oils

AD2272-C00       Gasket for vessel

AD2272-C02       Glass sample container

AD2272-C03       PTFE disc

AD2272-C04       Set of n°10 Copper coil

AD2272-C05       Spring

AD4742-C00       Glass sample container with PTFE disc for ASTM D 4742

AD4742-C01       Aluminium spacer

TA037C-N00       IP 37C thermometer (+144°C/+156°C)

TA102C-N00       ASTM 102C thermometer (+123°C/+177°C)

The softening point is the temperature at which a disk of the sample held within a horizontal ring is forced downward a distance of 25.4 mm under the mass of a steel ball as the sample is heated at a prescribed rate in a water or glycerine bath. The apparatus is a benchtop model which houses the components and a Panel PC with touch screen. A software running under Microsoft Windows Xp permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity. Besides, a unique cooling system, not fitted on other instruments permits to quickly cool down the sample allowing to handle the glassware and to perform a greater number of tests during a day by reducing the dead times between two analysis. The apparatus is suitable also to test coating mixtures and other materials different from bitumen.

• Enamel finished steel case.
• Pyrex beaker 1000 cc capacity for sample heating.
• Electric lifting device.
• Stainless steel sample support for up to two samples.
• Two brass ASTM rings, two centering devices and two steel balls.
• Electric stirrer with variable speed for the liquid bath: it can be excluded by turning off a switch on the control panel.
• Stainless steel heater.
• Brass cooling coil: tap water is used as cooling media and a solenoid valve is automatically opened by the controller when the test finishes.
• PC based controller with colour touch-screen interface.
• Photocell detector for softening point.
• Software characteristics: selection of the media used during the test, introduction of the test parameter through the touch-screen, selectable cooling time, storage of up to 400 test results and possibility of retrieve and print test reports, LAN connectivity, calibration and diagnostic routines.
• English written user manual.
• For 220 V/50 Hz connection: 800 W power consumption.
• Dimensions (l x w x h): mm 380 x 450 x 720 approx. Weight 40 Kg approx.
• CE marked.

AD0036-600        Apparatus

ACCESSORIES

AD0036-A00        Sample support

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

 

CONSUMABLES

AD0036-C00        Pyrex beaker

AD0036-C01        ASTM/IP ring

AD0036-C03        Centering ring

AD0036-C04        Steel ball

The apparatus is a benchtop model which houses the mechanical components and a miniature PC with touch screen. A software running under Windows Xp permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity. The instrument is equipped with a sensor for the correction of the results towards atmospheric pressure.

• Enamel finished steel case, benchtop version.
• Electric heating plate.
• Brass oil cup with insulating handle (n°1 Pt100 with cable and quick connector supplied with the instrument).
• Electronically driven mechanism that passes the flame over the cup at the correct intervals for the correct amount of time: electric pilot flames in conjunction with a solenoid valve on the gas line automatically light the flame and relight in case it extinguishes during the test.
• Second generation ionization flash sensor.
• Flame extinguisher: automatically extinguishes the flame covering the cup in case a fire is detected or after fire point detection.
• PC based controller with touch-screen interface.
• Software characteristics: selection of the ASTM/IP test method or setup of up to 40 custom methods, introduction of the test parameters through the touch screen, possibility to change the setpoint during the test, “search” option (for sample with unknown flash point), selectable cooling time, storage of up to 400 test results and possibility to retrieve and print test reports, LAN connectivity, calibration and diagnostic routines.
• LAN connectivity: the apparatus can be connected directly to a hub to become part of the user network: a software supplied with the apparatus permits to retrieve data also from another PC.
• Flash and fire point detection through ionization sensor: the apparatus also provides an alert if a flash has occurred at the  first flame application, warning that the test result is not reliable. The flash point temperature remains shown on the display until the operator’s acknowledgement.
• Safety device is provided to stop the analyzer if a flash has not been detected at a temperature 30°C over the preset value or at a temperature of 400°C. This safety device could be excluded to perform "search" tests.
• English written user manual. Microsoft Windows original license.
• Dimensions (l x w x h): mm 360 x 460 x 680. Weight: kg 36 approx.
• For 220 V/50 Hz connections: 600 W power consumption.
• CE marked.

 

AD0092-600        Apparatus

ACCESSORIES

AD0092-A00        Printer

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0092-C00        Oil cup

AD0092-C02        Pt100 probe

AD0092-C03        Electric ignitor

The apparatus consists of a constant temperature bath capable to work in the range from -10 to 40 °C (thanks to a built-in cooling compressor) with an electrically powered tractor that pulls apart at an selectable speed the two ends of two briquet specimens: a load cell records continuously the force applied to the briquets transmitting them plus the bath temperature and the carriage speed to a PC through the RS-232 serial interface or USB port (converter required): a data acquisition software permits to display data on graphs, store them on the hard-disk, obtain printed reports and calibrate temperature, force and elongation sensors

• Enamel finished steel case, floor mounted with swivelling castors.
• Stainless steel bath, thermally insulated, with drain valve.
• Chromium plated brass pump: it provides an adequate stirring of the liquid in the bath. Switch to turn it off during the test.
• Stainless steel heater.
• Microprocessor thermoregulator with PID action: built-in digital display 0.1°C accuracy. Probe: Pt100 RTD. Working range: from -10 to 40°C.
• Safety device against overheating and low level with alarm lamp.
• Built-in hermetic cooling compressor.
• Acrylic hinged cover: it helps to maintain a constant temperature in the bath providing a clear view of the inside.
• Traction carriage with variable speed motor: the carriage can contain 2 briquet molds. Automatic stop safety switch that stops the carriage when the maximum elongation has been reached. Traction length: 50, 100  or 150 cm.
• White PTFE screen fixed to the bottom of the bath: it permits a better vision of the test while in execution.
• Two load cells mechanically connected to the briquet molds. Range: 0 - 200 Newton: accuracy: 0.5 Newton.
• RS-232 serial interface for the connection to a PC: we can supply the instrument with a traditional desktop PC or the user can use one of his PC’s with the requirements reported in the “accessories” section here below.
• Data acquisition software running under Windows Xp/Vista/7: the software provides to record and show on graphs the force applied to the briquet molds, the elongation and the temperature of the bath. Data can be stored on a hard disk and printed. Software routines for calibration of temperature, force and elongation sensors.
• Easy access control box containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual with installation instructions.
• For 220 V/50 Hz connections: 1800 W power consumption.
• Dimensions (l x w x h): mm 1800 x 450 x 1300 approx. (100 cm version) 2400 x 450 x 1300 approx. (150 cm version). Weight: 250 kg approx.
• CE marked.

AD0113-500        Apparatus, 500 mm traction length

AD0113-510        Apparatus, 1000 mm traction length

AD0113-520        Apparatus, 1500 mm traction length

 

ACCESSORIES

AD0113-A00        Mold acc. to ASTM D 113 - IP 32 - IS 1208

AD0113-A01        Brass plate for mold assembling

AD5976-A00        Mold acc. to ASTM D 5976

PC01                    Desktop PC

PRN01                 Printer

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

USB-CONV         RS232 to USB converter

The apparatus consists of a penetrometer with adjustable head combined with a gear that permits a fine adjustment of the cone position right upon the bitumen sample: the results are showed on a digital display placed, together with an electronic timer in an independent control box.Optionally, refrigerated baths of various sizes are available (please require related technical bulletin): by connecting the bath to the transfer dish it is possible to penetrate samples while immersed in water at 25°C or other test temperatures.

• Robust flat aluminium base with centering device, spirit level and levelling screws.
• Encoder with 50 mm motion for penetration measurement.
• Digital penetration display with 1/10 mm accuracy.
• Electronic programmable timer for penetration time setting.
• Stainless steel cone plunger (47.5 g total weight) complete with electromechanical locking system. By pushing the start button the locking system is disabled: after the preset time (usually 5 seconds) the plunger is automatically locked in the reached position and the distance (penetration) from the top surface of the sample is shown on the display.
• Standard ASTM/IP needle, 2.5 g total weight.
• One 50 g  and one 100 g load weights.
• Button for manual handling of the plunger.
• Mirror and spot light.
• Easy access control box which contains all the electronics: anodized aluminium control panel with English written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 50 W.
• Dimensions (l x w x h): mm 350 x 325 x 350 approx. Weight: kg 15 approx.
• CE marked.

AD0005-100        Digital penetrometer for bitumens

ACCESSORIES

AD0005-A00        Transfer dish

AD0005-A01        Brass sample container, Ø 70x45 mm

AD0005-A02        Brass sample container, Ø 55x35 mm

AD0005-A03        Penetration measurement calibration block

CONSUMABLES

AD0005-C00        Needle acc. to ASTM D 5

AD0005-C01        Load weight 50 g

AD0005-C02        Load weight 100 g

AD0005-C03        Stainless steel plunger, 47.5 g

The apparatus consists of a constant temperature bath capable to work in the range from -10 to 40 °C (thanks to a built-in cooling compressor) with an electrically powered tractor that pulls apart at a determined speed the two ends of two briquet specimens: the elongation is measured by means of a pointer on the tractor and a graduated scale fixed to the cover.

• Enamel finished steel case, floor mounted with swivelling castors.
• Stainless steel bath thermally insulated: complete with drain valve.
• Chromium plated brass pump: it provides an adequate stirring of the liquid in the bath.
• Stainless steel heater.
• Microprocessor thermoregulator with PID action: built-in digital display 0.1°C accuracy. Probe: Pt100 RTD. Working range: from -10 to 40°C.
• Safety device against overheating and low level with alarm lamp.
• Built-in hermetic cooling compressor: CFC/HCFC-free gas.
• Acrylic hinged cover: it helps to maintain a constant temperature in the bath providing a clear view of the inside.
• Traction carriage with two-speed motor for 10 and 50 mm/min: the carriage supports 2 briquet molds. Automatic stop safety switch that stops the carriage when the maximum elongation has been reached. Traction length: 50, 100  or 150 cm.
• White screen fixed to the bottom of the bath: it permits a more clear vision of the elongated specimen during the test.
• Easy access control box containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual with installation instructions.
• For 220 V/50 Hz connections: 1800 W power consumption.
• Dimensions (l x w x h): mm 1800 x 450 x 1300 approx (AD0113-200) mm 2400 x 450 x 1300 approx (AD0113-250). Weight: 250 kg approx.
• CE marked.

AD0113-100        Apparatus, 50 cm traction length

AD0113-110        Apparatus, 100 cm traction length

AD0113-120        Apparatus, 150 cm traction length

ACCESSORIES

AD0113-A00        Mold acc. to ASTM D 113 - IP 32 - IS 1208

AD0113-A01        Brass plate for mold assembling

AD5976-A00        Mold acc. to ASTM D 5976

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

The apparatus consists of a convection oven manufactured as described in the ASTM E 145 specification (type IB), suitable for temperatures up to 180°C and equipped with a rotating shelf inside. An electronic controlled motor with gear reducer mounted on the top of the oven rotates the shelf at 5.5 rpm.

• Enamel finished steel case, benchtop model.
• Stainless steel interior with plenum fan for air circulation. Internal dimensions 380 x 380 x 380 mm. High efficiency thermal insulation.
• Stainless steel heater.
• Hinged door fitted with double wall window 300 x 200 mm, for internal view.
• Two openings, one on the bottom and one on the top for ventilation.
• Anodized aluminium horizontal rotating shelf 300 mm diameter, capable of supporting nine ASTM D 6 or three ASTM D 1754 sample containers. The shelf is suspended by a vertical shaft, centered with the horizontal interior dimensions and vertically located in the centre of the oven.
• Electronic controlled motor, 1/4 HP with built-in gear reducer that provides to rotate the shelf at a speed of 5.5 rpm.
• Microprocessor controlled thermoregulator with PID action and built-in digital display, 0.1°C accuracy. Probe: Pt100 RTD. Working range: from ambient to 180°C ± 1°C.
• Safety device against overheating.
• Easy access control box containing all the electronics: anodized aluminium panel with English written indications.
• English written user manual with installation instructions.
• For 220 V/50 Hz connections: 2000 W power consumption.
• Dimensions: 900 x 700 x 900 mm approx. Weight: 110 Kg approx.
• CE marked.

AD0006-100        Apparatus

ACCESSORIES

AD0006-A00        ASTM D 6 container

AD1754-A00        ASTM D 1754 container

AD1754-A01        ASTM D 1754 rotating shelf

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

TA013C-N00       ASTM 13C thermometer (+155°C/+170°C)

The apparatus consists of a benchtop steel case supporting the electrical heater, the gas ignitor and the thermometer support.

• Enamel finished benchtop steel case.
• Electric heating plate with stainless steel support.
• Electronic temperature regulator with dial on the front panel.
• Oil cup, brass with insulating handle.
• Gas ignitor, stainless steel, complete with valve and with support that permits to pass the flame over the cup at the correct distance.
• Pt100 probe for temperature acquisition.
• Support for Pt100 probe.
• Digital display for sample temperature, 0.1°C accuracy.
• English written user manual.
• For 220 V/50 Hz connections, 500 W power consumption.
• Dimensions (l x w x h): mm 360 x 360 x 300. Weight: 8 kg approximately.
• CE approved.

AD0092-110        Apparatus with digital display, 0.1°C accuracy (complete with PT100 RTD with cable and connector)

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0092-C00        Oil cup

AD0092-C01        PT100 probe

TA011C-N00       ASTM 11C thermometer (-6°C/+400°C)

RTFOT test is used to determine the effect of heat and air on a moving film of semi-solid asphaltic materials. The effects of this treatment are determined from measurements of the properties of the asphalt before and after having heated in a oven for 75 minutes at 163°C a moving film of asphaltic material while air at a rate of 4 l/min is directed against the sample. The apparatus consists of a forced air circulation oven suitable for temperatures up to 180°C and equipped with a rotating shelf placed inside along with a coil that preheats the air directed into the sample container.

 

• Enamel finished steel case benchtop version.
• Stainless steel inside walls with 38 mm air plenum. Glass wool and ceramic fibers heating insulation.
• Door with double tempered glass window for internal view.
• Chromium plated coiled air line, 8 mm diameter and 7.6 m long, with 1 mm diameter orifice. The orifice is placed 8 mm from the opening of the glass containers.
• Adjustable flowmeter for the regulation of the air jet inside the oven: the flowmeter is complete with a regulation valve and is placed on the left side of the case.
• Squirrel cage fan, 135 mm diameter and 75 mm height, placed at a midpoint in the width of the oven and 150 mm from the face of the carriage. The speed of the fan is electronically regulated at 1725 rpm: fan motor disposed externally.
• Vertical circular aluminium carriage 300 mm diameter, placed 160 mm from the upper inside wall of the oven, excluding the air plenum, and 110 mm from the rear inside wall. The carriage is equipped with stainless steel clips for firmly holding eight glass containers.
• The location of the thermometer support permits to check the thermometer through the door window during the test.
• Electronically controlled motor with reducing gear for a 15 rpm precise carriage rotation.
• Microprocessor controlled thermostat with PID action with built-in digital display 0.1°C accuracy showing the set point and the current temperature inside the oven. Probe: Pt100 RTD. For working temperature of 163°± 0.5° C.
• Safety device against overheating.
• Safety device that stops the carriage in case the door is opened during the test.
• English written user manual.
• For 220 V/50 Hz connections: 2200 W power consumption.
• Dimensions (l x w x h): mm 940 x 890 x 910 approx.  Weight: 115 kg approx.
• CE marked.

AD2872-100        Apparatus

ACCESSORIES RTFOT

AD2872-A00        Glass sample container

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES RTFOT

TA013C-N00       ASTM 13C thermometer (+155°C/+170°C)

The equipment consists of a compact benchtop circulation cooler to be placed below the bench supporting the penetrometer: thanks to a built-in cooling compressor, temperature can be maintained in a range from 0 to 50°C with 0.1°C precision. A pump permits to circulate the liquid in the transfer dish placed on the penetrometer.

• Enamel finished benchtop steel case.
• Stainless steel inside tank, 10 liter capacity, thermally insulated.
• Stainless steel cover.
• Electric pump with overload protection. The pump is equipped also with a propeller to stir the liquid in the tank.
• Stainless steel heater.
• Air cooled hermetically-sealed single stage cooling compressor placed aside the tank. Chromium plated cooling coil. CFC/HCFC-free gas is used to fill the circuit.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1 °C accuracy. Probe: Pt100 RTD. The heater is piloted through a SSR.
• Safety device against over-temperature and low-level: it cut off the power supply and light a lamp on the control panel in case of alarm.
• 3 m thermally insulated tubing to connect to the transfer dish.
• Easy access control box containing all the electronics: anodized aluminium panel with English written indications.
• English written user manual.
• For 230 V/50 Hz connection. Power consumption: 500 W approx.
• Dimensions (l x w x h): 500 x 400 x 500 mm approx. Weight: 25 kg approx.

AD0005-200    Apparatus ACCESSORIES CAL001          PT100 simulator CAL002          Officially certified PT100 simulator

The dropping point is the temperature at which the grease passes from a semisolid to a liquid state under the conditions of test. Cooperative testing indicates that in general, dropping points by test method D 566 is in agreement. The test, usually carried on with manually operated analyzers, has been totally automated with this instrument: in fact it provides automatically to regulate the heating rate, beginning with a 5.5°C/min rate and then reducing it to 1°C/min rate. The apparatus is a benchtop model which houses the components and a Panel PC with touch screen. A software running under Microsoft Windows XP permits to select the test method and the test parameters, run the test automatically, store, retrieve and print data, diagnose and calibrate the instrument offering in the meanwhile all the features of Windows systems such as LAN connectivity.A unique cooling system permits to cool down quickly the heating furnace allowing to start a new test in a few minutes.

The apparatus consists of a case containing a stainless steel bath and supporting precision flowmeters. The bath is equipped with a stainless steel cover with holes for the introduction of the evaporation cells.

• Enamel finished benchtop steel case.
• Stainless steel bath with drain valve. High efficiency thermal insulation.
• Electric stirrer with stainless steel shaft and propeller.
• Stainless steel heaters.
• Stainless steel cell support.
• High precision flowmeters with needle valve and complete with calibration certificate. For a flow rate of 2 l/min.
• Air filter containing glass wool.
• Microprocessor thermoregulator with PID action: built-in digital thermometer 0.1°C accuracy. Probe: Pt100 RTD. Test range: from ambient to 160°C.
• Safety device against overheating and low-level.
• English written user manual.
• For 220 V/50 Hz connection. Power consumption 2000 W.
• Dimensions (l x w x h): mm 800 x 400 x 700 approx. Weight: kg 45 approx. (four-unit version).
• CE marked.
• Two and four place units available
• Version with mass flow controllers and software also available.

AD0972-100        Two-place unit

AD0972-110        Four-place unit

ACCESSORIES

AD0972-A00        Stainless steel cell with copper coil for air heating

AD0972-A01        Test cup for oil

AD0972-A02        Test cup for grease

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

TA022C-N00       ASTM 22C thermometer (+95°C/+103°C)

TA067C-N00       ASTM 67C thermometer (+95°C/+155°C)

Worked penetration results may be used to establish the consistency of lubricating greases after prolonged working. The change in worked penetration results on a grease after prolonged working are believed to be a measure of its shear stability under the conditions of the test.The electrically operated grease working machine consists of a geared motor for 60 strokes/min mounted on a aluminium base with clamps to fix the grease workers. The number of strokes, continuously showed on a display, can be preset to stop the worker after any required number of strokes up to 100,000.

• Cast aluminium base, machine worked and enamel finished. Benchtop version.
• Geared motor unit for 60 strokes/min.
• Two crank flanges, cast iron.
• Programmable counter with six digits.
• Two grease workers.
• Two worker plates, 51 holes.
• Wrench for opening and closing of grease workers.
• For 380V / 50Hz connections: 600 W power consumption.
• English written user manual.
• Dimensions (l x w x h): mm 450 x 450 x 350 approx. Weight: kg 30 approx.
• CE marked.
• Single and dual units available.

AD0217-100        Single-unit grease working machine

AD0217-110        Dual-unit grease working machine

ACCESSORIES

AD0217-A00        Worker plate, 51 holes

AD0217-A01        Worker plate, 270 holes (FTMS 313.3)

AD0217-A02        Lip seal for rod

AD0217-A03        Overflow ring

AD0217-A04        Blank cup cover (used when preheating the sample prior to test)

The apparatus consists of a case hosting the aluminium block and supporting precision flowmeters. The block has jackets for the introduction of the cups: the air preheater is in the bottom. Each position is equipped with a digital display, connected to a thermocouple, that continuously shows the temperature of the air coming out from the cell.

• Enamel finished benchtop steel case.
• High efficiency thermal insulation to avoid heating of the external case.
• Aluminium block with holes for the introduction of the cell.
• Air preheater inserted in the bottom of the block, one for each position: each preheater is independently regulated through an electronic voltage variator.
• Stainless steel band heaters.
• Covers, air eduction tubes hoods and cups, stainless steel. Kalrez gaskets.
• Digital displays (one for each position) for the indication of the temperature of the air coming out from the cells. Probe: type K thermocouple (also supplied).
• High precision flowmeters with needle valve and complete with calibration certificate, 0-3 l/min scale.
• Air filter fixed on the case and containing glass wool.
• Microprocessor thermoregulator wiith PID action: built-in digital thermometer 0.1°C accuracy. Pt100 probe. Test range: from ambient to 316°C.
• Safety devices against overheating.
• English written user manual.
• For 220 V/50 Hz connection. Power consumption 2000 W.
• Dimensions (l x w x h): mm 860 x 730 x 520 approx. Weight: kg 100 approx. (2-place version)
• CE approved.
• Two and four-place units available

AD2595-000        Two-place unit

AD2595-100        Four-place unit  

ACCESSORIES

AD2595-A00        Digital thermometer

CONSUMABLES

AD2595-C00        Type K thermocouple with supports (for air temperature measurement)

AD2595-C01        Cover and eduction tube

AD2595-C02        Sample cup with hood

AD2595-C03        Gasket

TA003C-N00       ASTM 3C thermometer (-5/+400°C)

The apparatus consists of a benchtop case containing an aluminium block and the electronics: a touch screen interface on the front permits to control the equipment. Temperature and pressure data are graphically shown and can be retrieved or printed: the software comprehends also a diagnostic and calibration routine. Vessels are equipped with a pressure transducer and a quick connect cable for the connection to the instrument: an oxygen line consisting of a flexible tube with valve and gage permits loading operations.

• Enamel finished aluminium and steel case, benchtop version.
• Dry block heater, two, four or six-place.
• 8.4” touch screen color interface that permits to set block temperature, start/stop tests, enter sample data, diagnose and calibrate temperature and pressure sensor. Temperature digital display with 0.1°C accuracy and +/- 0.1°C regulation accuracy connected to Pt100 RTD.  Selectable kPa/psi pressure indicators with 0.1 kPa/psi accuracy: high precision electronic pressure sensors 0 to 2000 kPa scale with 0.1% f.s. accuracy.
• Working range: from ambient to 120°C. Regulation accuracy: ± 0.1°C.
• Stainless steel cartridge heaters, SSR controlled.
• Independent safety device against overheating.
• Oxygen distributor with gage and flexible tube with quick connects for rapid filling of the vessels.
• User friendly graphical software complete with diagnose and calibration routine.
• N° 2 USB ports, n° 1 RS-232 interface and n° 1 Ethernet port on the back panel for the connection to printers or laboratory network.
• English written user manual. CE marked.
• For 220 V/50 Hz connections: 2000 W max power consumption.

AD0942-600        Apparatus for two vessels, aluminium block. Dimensions: 600 x 760 x 770 mm. Weight: 80 kg.

AD0942-610        Apparatus for four vessels, aluminium block. Dimensions: 600 x 760 x 770 mm. Weight: 110kg.

AD0942-620        Apparatus for six vessels, aluminium block. Dimensions: 650 x 760 x 770 mm. Weight: 130kg.

ACCESSORIES

AD0942-A00      Oxidation vessel complete with valve, bursting disk, pressure transducer head cable and connector

AD0942-A01      Stainless steel dish holder

PRN01                Printer

CAL001               PT100 simulator

CAL003               Official Certificate for Pt100 simulator

CONSUMABLES

AD0942-C00       Gasket for vessel

AD0942-C01       Glass sample container

TA022C-N00       ASTM 22C thermometer (+95°C/+103°C)

The apparatus consists of a benchtop case with a hinged shield that covers the rolling mechanism vane. Two and four-cylinder units are available.

• Enamel finished benchtop steel case.
• Upper vane hosting the rolling mechanism ball bearing mounted. Aluminium bearing supports.
• Thermally insulated hinged cover with safety switch that stops the roller motor, fan and heater when opened.
• Microprocessor thermoregulator with built-in digital display 0.1°C accuracy. Probe: Pt100 RTD. Working range: from ambient to 100 +/- 1°C.
• Safety device against overheating.
• Stainless steel heater.
• Fan for air circulation inside the cylinder vane.
• Set of stainless steel cylinders with threaded caps and 5 kg brass roller weights.
• Electronic timer that stops the test at the end of the preset time. Buzzer that sounds to alert that test is completed.
• Electronically driven motor for operation at 10 and 165 rpm. Thermally protected against overload.
• Control box containing all the electronics.
• English written user manual.
• For 220 V/50 Hz connections: 1000 W power consumption.
• Four-cylinder apparatus also available.
• CE marked.

AD1831-100        Two-cylinder apparatus. Dimensions (l x w x h): mm 500 x 400 x 400. Weight: 55 kg

AD1831-110        Four-cylinder apparatus. Dimensions (l x w x h): mm 500 x 650 x 400. Weight: 80 kg

 

ACCESSORIES

AD1831-A00        Cylinder with threaded caps

AD1831-A01        Roller weight, 5 kg

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

The equipment consists of a compact benchtop circulation cooler to be placed below the bench supporting the penetrometer: thanks to a built-in cooling compressor, temperature can be maintained in a range from 0 to 50°C with 0.1°C precision. A pump permits to circulate the liquid in the transfer dish placed on the penetrometer.

• Enamel finished benchtop steel case.
• Stainless steel inside tank, 10 liter capacity, thermally insulated.
• Stainless steel cover.
• Electric pump with overload protection. The pump is equipped also with a propeller to stir the liquid in the tank.
• Stainless steel heater.
• Air cooled hermetically-sealed single stage cooling compressor placed aside the tank. Chromium plated cooling coil. CFC/HCFC-free gas is used to fill the circuit.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1 °C accuracy. Probe: Pt100 RTD. The heater is piloted through a SSR.
• Safety device against over-temperature and low-level: it cut off the power supply and light a lamp on the control panel in case of alarm.
• 3 m thermally insulated tubing to connect to the transfer dish.
• Easy access control box containing all the electronics: anodized aluminium panel with English written indications.
• English written user manual.
• For 230 V/50 Hz connection. Power consumption: 500 W approx.
• Dimensions (l x w x h): 500 x 400 x 500 mm approx. Weight: 25 kg approx.

AD0005-200    Apparatus ACCESSORIES CAL001          PT100 simulator CAL002          Officially certified PT100 simulator

The apparatus consists of a benchtop case supporting the motor, the bath, the pump and the water pipes. All the electronics is contained in a control box fixed to the instrument body.

• Enamel finished benchtop steel case.
• Test bearing housing and shield manufactured exactly as specified in the method.
• Stainless steel reservoir complete with inlet and outlet lines, aluminium housing mount, chromium plated brass circulating pump, 1/4 HP electric driving motor with belts;
• Stainless steel cartridge heater.
• Microprocessor thermoregulator with built-in digital display 0.1°C accuracy. Probe: Pt100 RTD. Working range: from ambient to 100°C. Suitable for working at 37.8 ± 0.1°C and 79 ± 0.1°C;
• Motor and pulleys for operation at 600 ± 30 rpm;
• The motor and pulley arrangement permits to start the water pump without starting the bearing for water flow calibration;
• Regulation and by-pass valve to regulate the flow at 5 ± 0.5 ml/sec through a 1 mm capillary;
• English written user manual.
• For 220 V/50 Hz connections: 600 W power consumption;
• Dimensions: mm 400 x 400 x 600. Weight: 25 kg.
• CE marked.

AD1264-100        Apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1264-C00        Test bearing type 6204

TA015C-N00       ASTM 34C thermometer (+25°C/+105°C)

The apparatus consists of a benchtop case containing all the electronics and supporting the front-wheel hub and spindle assembly encased in a thermostatically controlled air bath. The motor is placed in the rear and rotates the spindle at 660 rpm through a V-belt drive.

• Enamel finished benchtop steel case. Hinged shield with thermal insulation. Safety switch that stops the motor and the heating when the shield is open.
• Stainless steel bearing spindle fixed to the body with insulating spacers. Jacket for ASTM 7C spindle thermometer.
• Stainless steel hub with aluminium driven pulley and leakage collector.
• One Timken n° 15118 bearing with n° 15250 cup.
• One Timken n° 9074 bearing with n° 9196 cup.
• 1/3 HP electric motor with metal shaft extension, drive pulley and fan built exactly as prescribed by the ASTM D 1263 test method. The motor is mounted on an adjustable support to permit tightening the pulley.
• Stainless steel heaters.
• Microprocessor thermostat with PID action and built-in digital display 1°C accuracy. Probe: Pt100 RTD.
• Working range: from ambient to 165 °C. Regulation accuracy: +/- 1°C.
• Safety devices against overheating.
• Digital timer for the operation time regulation: it stops the spindle automatically after the preset time has elapsed.
• For 220 V/50 Hz connections: 1700 W power consumption.
• English written user manual.
• CE marked.
• Dimensions (l x w x h): 550 x 450 x 380 mm. Weight: 70 kg.

AD1263-100        Apparatus

AD1263-110        Apparatus with digital display for the spindle temperature

ACCESSORIES

AD1263-A00        Torque wrench

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1263-C00        Large bearing

AD1263-C01        Small bearing

TA007C-N00       ASTM 7C thermometer (-2°C/+300°C)

The apparatus consists of a benchtop case hosting the heating block and a frame supporting the stirring mechanism. The block has a series of jackets for the sample containers: a turntable permits to assemble the sample containers before putting them in the jackets all together. The block can reach temperatures up to 150°C +/- 0.1°C: it is heated by means of a coaxial heater. The stirring device is actuated by means of an electronically piloted gear reduced motor connected to a cam: it is regulated for 25 rpm.

• Enamel finished steel case with robust base to support the heating block.
• Aluminium alloy machined circular heater with a series of jackets for sample tubes.
• Water manifold with a series of hose connectors for condensers connection.
• Water manifold for condenser sink.
• Stroke mechanism that dips the copper coil in and out the oil under test 25 times per minute.
• Adjustable stroke counter that stops the mechanism after the desired number of strokes.
• Microprocessor controlled thermoregulator with PID action and built-in digital display 0.1 °C accuracy showing the temperature and the set-point. Four buttons easy-to-use keyboard to preset working temperature. Probe: Pt100 RTD. Regulation accuracy: ± 0.1°C.
• Stainless steel heater.
• Safety device that cuts off the power supply and light a lamp on the control panel in case of overheating of the heating block.
• Easy access control box placed on the left side of the apparatus containing all the electronic and electrical components: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 2500 W.
• Dimensions (l x w x h): mm 550 x 550 x 1000 approx. Weight: 80 kg approx.
• CE marked.
• Without glassware and copper coils.

 

D51554-100         6 place apparatus

D51554-110         8 place apparatus

D51554-120         12 place apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

D51554-C00        Sample tube with female conic cut

D51554-C01        Liebig condenser with male conic cut and two hose connectors for water inlet and outlet.

D51554-C02        Glass rod (copper coil support)

D51554-C03        Copper coil

Specifications may vary without notice.

The apparatus consists of a benchtop steel case containing a stainless steel bath with a cover with up to eight jackets that allow the introduction of the vessels and a control box containing all the electronics.

• Enamel finished steel case, benchtop model.
• Stainless steel bath equipped with a cover with holes for the insertion of the vessels; covers with hook for the vessels.
• Electric stirrer.
• Control thermometer jacket on the bath cover.
• Microprocessor thermoregulator with PID action and built-in temperature display 0.1°C accuracy. Probe: PT100 RTD.
• Working range: from ambient to 80°C. Regulation accuracy ± 0.1°C.
• Safety device against overheating and low-level.
• Easy access control box placed on the right side of the apparatus and containing all the electronics: anodized aluminium control panel with English written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 2500 W.
• CE marked.
• Four, six and eight-position version available.

AD1838-100        Apparatus for four vessels. Dimensions (l x w x h): 640 x 400 x 600 mm. Weight: kg 40 approx.

AD1838-110        Apparatus for six vessels. Dimensions (l x w x h): 700 x 400 x 600 mm. Weight: kg 45 approx.

  AD1838-120           Apparatus for eight vessels. Dimensions (l x w x h): 760 x 400 x 600 mm. Weight: kg 50 approx.

ACCESSORIES

AD1838-A00        Stainless steel cylinder with valves

AD1838-A01        Spare needle valve A

AD1838-A02        Spare needle valve B

AD1838-A03        ASTM Copper Strip Corrosion Standard

AD1838-A04        Strip vise for one strip

AD1838-A05        Strip vise for four strips

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1838-C00        O-ring gasket

AD1838-C01        Copper strip 75 x 12.5 x 3 mm

AD1838-C02        Silicon carbide paper 100 grit, 12 sheets

AD1838-C03        Silicon carbide grains, 0.5 kg

AD1838-C04        Silicon carbide paper 150 grit, 12 sheets

AD1838-C05        Silicon carbide paper 240 grit, 12 sheets

AD1838-C06        Viewing flat test tube

TA012C-N00       ASTM 12C thermometer (-20°C/+102°C)

The apparatus, suitable for the execution of the test at 40, 50 and at 100°C, consists of a benchtop steel case containing a stainless steel bath with a four-hole cover to allow the introduction of the vessels or the test tubes and a control box containing all the electronics.

• Enamel finished steel case, benchtop model.
• Stainless steel bath equipped with a cover with holes for the insertion of the vessels or the test tubes; covers with hook for the vessels.
• Electric stirrer.
• Stainless steel auxiliary heater.
• Condensing bath cover that avoid steam leaks from the cover while the bath is used at 100°C.
• Control thermometer jacket on the bath cover.
• Microprocessor thermoregulator with PID action and built-in temperature display 0.1°C accuracy. Probe: PT100 RTD.
• Working range: from 30°C to 120°C. Regulation accuracy ± 0.1°C.
• Safety device against overheating and low-level.
• Easy access control box placed on the right side of the apparatus and containing all the electronics: anodized aluminium control panel with English written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 2500 W.
• CE marked.
• Apparatus with support for multiple tubes also available.
• Dry baths also available: request related bulletin.

AD0130-100: Apparatus for four vessels with water bath. Dimensions (l x w x h): 640 x 400 x 600 mm. Weight: kg 40 approx.

AD0130-110: Apparatus for six vessels with water bath. Dimensions (l x w x h): 700 x 400 x 600 mm. Weight: kg 45 approx.

AD0130-120: Apparatus for eight vessels with water bath. Dimensions (l x w x h): 760 x 400 x 600 mm. Weight: kg 50 approx.

   AD0130-300: Apparatus for four vessels with aluminium block.

ACCESSORIES

AD0130-A00        Stainless steel corrosion test vessel

AD0130-A01        Test tube support (for 3 test tubes)

AD0130-A02        ASTM Copper Strip Corrosion Standards

AD0130-A03        Strip vise for one copper strip

AD0130-A04        Strip vise for four copper strips

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0130-C00        Glass test tube Æ 26

AD0130-C01        O-Ring for vessel

AD0130-C02        Copper strip 75 x 12.5 x 3 mm

AD0130-C03        Silicon carbide paper, 240 grit (pack of 12 sheets)

AD0130-C04        Silicon carbide paper, 150 grit (pack of 12 sheets)

AD0130-C05        Silicon carbide grains (0.5 Kg pack)

AD0130-C06        Viewing test tube

   TA012C-N00         ASTM 12C thermometer (-20°C/+102°C)

The apparatus, consists of a benchtop steel case containing a stainless steel bath: the cover has a series of holes suitable for both glassware for copper and silver strip corrosion tests and vessels for copper strip corrosion test. Two manifolds permit to easily connect cooling water to silver corrosion glassware.

• Enamel finished steel case, benchtop model.
• Stainless steel bath, 30 liters capacity: cover with holes, suitable for silver corrosion test tubes, copper strip tarnish test vessels or test tubes. The cover is equipped with a condensing coil in order to avoid steam leaks when used at 100°C.
• Control thermometer jacket.
• Electric stirrer.
• Stainless steel auxiliary heater with dedicate switch on the control panel.
• Microprocessor thermoregulator with PID action and built-in temperature display 0.1°C accuracy. Probe: PT100 RTD.
• Working range: from 30°C to 110°C. Regulation accuracy ± 0.1°C.
• Safety device against overheating and low-level.
• Easy access control box placed on the right side of the apparatus and containing all the electronics: anodized aluminium control panel with English written indications.
• English written user manual.
• For 230V/50/60 Hz connections. Power consumption 2500 W.
• CE approved.
• Four, six and eight-unit apparatus available.

AD0130-200        Four-place unit. Dimensions (l x w x h): 760 x 400 x 900 mm. Weight 45 kg approx.

AD0130-210        Six-place unit. Dimensions (l x w x h): 860 x 400 x 900 mm. Weight 55 kg approx.

AD0130-220        Eight-place unit. Dimensions (l x w x h): 960 x 400 x 900 mm. Weight 65 kg approx.

ACCESSORIES FOR ASTM D 130

AD0130-A00        Stainless steel corrosion test vessel

AD0130-A01        Test tube support (for 3 test tubes)

AD0130-A02        ASTM Copper Strip Corrosion Standard

AD0130-A03        Strip vise for one strips

AD0130-A04        Strip vise for four strips

CONSUMABLES FOR ASTM D 130

AD0130-C00        Glass test tube Ø 26 mm

AD0130-C01        O-Ring seal for test vessel

AD0130-C02        Copper strip 75 x 12.5 x 3 mm

AD0130-C03        Silicon carbide paper, 240 grit, 12 sheets

AD0130-C04        Silicon carbide paper, 150 grit, 12 sheets

AD0130-C05        Silicon carbide grains, 150 grit, 0.5 kg

AD0130-C06        Viewing test tube

TA012C-N00       ASTM 12C thermometer (-20°C/+102°C)

  ACCESSORIES FOR IP 227

  IP0227-A00         ASTM D 1660 comparative table

  IP0227-A01         Strip vise for four strips

  CONSUMABLES FOR IP 227

  IP0227-C00         Amber-glass sample container

  IP0227-C01         Amber-glass condenser

  IP0227-C02         Silver strip support

  IP0227-C03         Silver strip

  IP0227-C04         Silicon carbide paper, 240 grit, 12 sheets

  IP0227-C05         Silicon carbide paper, 150 grit, 12 sheets

  IP0227-C06         Silicone carbide grains, 150 grit, 0.5 kg

GENERIC ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

The apparatus consists of a base supporting one or two heat-transfer corrosion cells. Cells are rated for a working pressure up to 40 psi and working temperature up to 160 °C. An electronic timer permits to set the test duration while an electronic thermostat is used to control the temperature.

• Enamel finished benchtop steel base.
• Safety screen surrounding the cell(s).
• Heat transfer corrosion cell composed by a Pyrex-glass cell with stainless steel top and bottom plates.
• Stainless steel heat transfer bar. 950 W coaxial heater piloted through a solid state relay.
• Stainless steel manifold mounted on the top plate and equipped with purge valve, pressure relief valve and gage.
• Filling nozzle with cap on the top plate.
• Four stainless steel rods for assembly.
• Electronic thermoregulator with PID action and built-in digital display. Probe: type K thermocouple. In the twin-unit, an independent thermostat for each position is adopted.
• Working range: from ambient to 160°C.
• Safety device against overheating.
• Electronic timer: it is possible to preset the test duration. When the preset time is elapsed, the heater is automatically turned off. In the twin-unit, an independent timer for each position is adopted.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 2200 W (twin unit) and 1100 W (single unit).
• Dimensions (l x w x h): 800 x 350 x 850h mm (twin unit) and 450 x 350 x 850h mm (single unit).
• CE marked.

AD4340-100        Single-unit apparatus

AD4340-110        Double-unit apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD4340-C00        Specimens

AD4340-C01        Pyrex glass cell

AD4340-C02        Viton gasket

AD4340-C03        Type K thermocouple

The apparatus consists of a benchtop case which houses an aluminium heating block. Two versions are available: one for the “Air Jet” test on gasoline and one for both the “Air and Steam Jet” tests with a built-in steam superheater. Steam generator and air blower are also available.

• Enamel finished benchtop steel case with robust base to support the heating block.
• Five-place aluminium heating block with steam outlets. Stainless steel steam coils and outlets (removable).
• Stainless steel coaxial heater.
• Stainless steel steam superheater inserted in the case. Complete with regulator.
• High precision flowmeter for the Air Jet test: range from 0 to 12 m3/h.
• Stainless steel gauge for the Steam Jet Test: range from 0 to 6 psi.
• Microprocessor thermoregulator with built-in digital display 1°C accuracy.  The probe is a PT100 RTD. Regulation accuracy ± 0.5 C. Working range: from ambient to 300°C.
• Safety device against overheating.
• Easy access control box placed on the right  side of the apparatus containing all the electronic and electrical components: anodized aluminium control panel with english written indications. Main and heater switch.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 3500 W.
• Dimensions (l x w x h): mm 860 x 560 x 840 approx. Weight: 98 Kg.
• CE marked.

AD0381-100      Apparatus for the Air and Steam Jet tests

AD0381-110      Apparatus as above but only for the Air Jet test (without steam superheater). For 220V/50 Hz. Power   consumption: 2000 W. Dimensions (l x w x h): mm 750 x 490 x 680  approx. Weight 73 Kg approx.

 

ACCESSORIES

AD0381-A00        Electric Steam generator (400V/50 Hz, 10 kW)

AD0381-A01        Air Blower (380 V/50 Hz, 0.5 kW)

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0381-C00        Pyrex glass sample container

TA003C-N00       ASTM 3C thermometer (-5°C/+400°C)

The apparatus consists of a benchtop case hosting the heating bath (aluminium block bath also available) and a rear frame with a manifold for the cooling water and a series of supports for the condensers. The main advantage of the aluminium block apparatus is that hot oil and fumes are completely eliminated.

• Enamel finished benchtop steel case.
• Stainless steel oil bath with four holes for the glassware. Optionally, aluminium block heater with four holes for the glassware.
• Electric stirrer (only in the water/oil bath versions).
• Stainless steel electric heater.
• Glassware support with lifting device.
• Removable stainless steel cover.
• Frame supporting a manifold with four water outlets with regulating valve. A second manifold is provided for connection to the outlets of the condensers.
• Electronic thermoregulator with PID action and built-in digital display. Probe: Pt100 RTD.
• Working range: from ambient to 160°C.
• Safety device against overheating and low-level.
• Four high precision variable area flowmeters 150 mm scale length, 0 to 130 ml/min measurable flow with hose connectors at the outlet. Inlet connected to a manifold.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 2000 W.
• Dimensions (l x w x h): 700 x 400 x 850 mm. Weight: 50 kg approx.
• CE marked.
• Six and eight-place apparatus also available. For low-boiling accessories please request separate quotation.
• Version with mass flow controller and software also available.

AD1384-100        Four-place apparatus, water/oil bath

AD1384-110        Four-place apparatus, aluminium block

AD1384-120        Six-place apparatus, water/oil bath

AD1384-130        Six-place apparatus, aluminium block

AD1384-140        Eight-place apparatus, water/oil bath

AD1384-150        Eight-place apparatus, aluminium block

 

ACCESSORIES

AD1384-A00        Set of four specimen bundles

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1384-C00        Container, 1000 ml with cover

AD1384-C01        Condenser, glass, 400 mm length

AD1384-C02        Aerator tube

TA001C-N00       ASTM 1C thermometer (-20°C/+150°C)

The apparatus consists of a benchtop steel case containing a pyrex jar, 330 mm deep, that permits the use of a wide range of viscometer tubes. Up to six viscometer tubes can be inserted on a turntable that allows to carry in the front of the jar the tube on which the operator is working on.

• Enamel finished benchtop steel case.
• Borosilicate glass jar 330 mm deep visible through the front window.
• Built-in lighting device placed on the rear side of the case and covered with a frosted glass to avoid dazzling to the operator.
• Steel safety recovery bath capable to contain the liquid in case of breaking of the jar.
• Electric stirrer.
• Six-position turntable built-in the top cover: it permits each viscometer tube to be brought to the front without take it off the bath. Suitable for Cannon-Fenske and Ubbelohde tubes.
• Stainless steel heaters: the auxiliary heater automatically switches off when the selected temperature has been reached.
• Stainless steel cooling coil: when connected to a cold water source it permits to keep temperatures below ambient in the jar.
• Electronic temperature control ± 0.01°C. Probe: Pt100 RTD.
• Digital setting of the desired bath temperature: setting accuracy 0.01°C. Digital thermometer 0.01°C accuracy.
• Working range: from ambient to 150°C.
• Six synthetic rubber tube holders for Cannon Fenske or Ubbelohde viscometer tubes.
• Six viscometer tube hole stainless steel covers.
• Control thermometer jacket placed on the bath cover.
• Safety devices against overheating and low-level.
• Easy access control box placed on the right side of the apparatus and containing all the electronic and electrical components: aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 1800 W.
• Dimensions (l x w x h): mm 460 x 520 x 900. Weight: 45 kg.
• CE marked.

AD0445-111     Apparatus with built-in digital thermometer, 0.01 °C accuracy

AD0445-120    Low cost version without surrounding case, recovery bath, rotating cover, digital thermometer and rear light. The apparatus consists of a metal base supporting a Pyrex jar and the control box. The jar cover has five jackets for the capillaries. Working range: from ambient to 120°C. The electronics is the same of the AD0445-111

 

ACCESSORIES

AD0445-A00        Battery chronograph

AD0445-A01        Portable digital thermometer with Pt100 probe

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

TAO46C-N00      ASTM 46C thermometer (+48.6°C/+51.4°C)

TA120C-N00       ASTM 120C thermometer (+38.6°C/+41.4°C)

TA121C-N00       ASTM 121C thermometer (+98.6°C/+101.4°C)

AD0445-C00        Cannon-Fenske capillary support

AD0445-C01        Ubbelohde capillary support

The apparatus consists of a support hosting two filtering units. A unique mechanism permits to the operator to stay far from hot parts of the instrument during the operations to avoid risks of burnings.

• Two chromium plated brass filtering units with heating coils fitted with hose connectors and silicon tubes to the manifold.
• Insulating supports for the two funnels.
• Mechanical device to firmly press the cups against the funnels.
• Stainless steel manifolds.
• Vacuum valve to connect the funnels to the vacuum line with leverage on the front of the apparatus.
• Two separated vacuum circuits with two gauges.
• Semiautomatic version with a PLC that automatically controls the phases of the analysis through solenoid valves also available.

IP0375-100          Manual apparatus

IP0375-110          Semi-automatic apparatus

IP0390-100          Ageing bath for IP 390 test (4-place aluminium block) without glassware

ACCESSORIES

IP0375-A00      Vacuum pump

IP0375-A01     Fully automatic steam generator with safety pressure control. The steam generator has to be connected to a water source. For 220V/50 Hz connections

Note: vacuum pump and steam generator are parts of the apparatus and must be added to it in case they are not yet available in the laboratory.

CONSUMABLES

IP0375-C00         Pack of 100 Whatman GF/A Ø 47 mm filters

IP0375-C01         Sintered bronze filter support with OR gasket

IP0375-C02         Pack of 10 OR gaskets for filter support

IP0375-C03         Vacuum flask, 500 ml

IP0390-C00        Conical flask 50 ml capacity with bored cork, air

                               condenser and rubber stopper

TA022C-N00       ASTM 22C thermometer (+95°C/+103°C)

Specifications may vary without notice.

The apparatus consists of a benchtop oven with a turntable inside that can carry four or eight 200 ml Coca-Cola bottles. The turntable rotates the bottles at 5 rpm.

• Enamel finished benchtop steel case.
• Stainless steel inside.
• Stainless steel heater.
• High-efficiency thermal insulation.
• Machined aluminium turntable with supports for 200 ml Coca-Cola bottles.
• Safety switch that stops the turntable when the door is open.
• Microprocessor controlled thermoregulator, PID action with built-in digital display 0.1°C accuracy. Probe: Pt100 RTD. Regulation accuracy ± 0.5°C.
• Safety devices against overheating.
• Working range: from ambient to 100°C.
• One capping press.
• Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 1500 W.
• Dimensions (l x w x h): mm 800 x 600 x 650 approx. Weight: kg 80 approx.
• CE marked.

AD2619-100        Four-place apparatus

AD2619-110        Eight-place apparatus

ACCESSORIES

AD2619-A00        Filtration assembly

AD2619-A01        Set of 100 filters diam. 47 mm

AD2619-A02        Vacuum flask, 500 ml

AD2619-A03        Capping press

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD2619-C00        Coca-Cola bottle

AD2619-C01        Pack of 50 caps with gaskets

AD2619-C02        Copper strips

Specifications may vary without notice.

The apparatus consists of a benchtop case hosting the bath and the cooling compressor. One important feature of this apparatus is that the bath is a stainless steel tank (no double-wall glass beaker is used) with a large tempered glass window for a clear view of the inside. The cover of the bath can host two Cannon-Fenske or Ubbelohde capillaries.

• Enamel finished steel case, benchtop model or floor mounted with swivelling castors.
• Stainless steel bath (with drainage), 12 liters capacity with thermally insulated front window for a clear view of the inside: a second window on the rear of the tank is provided for the built-in light.
• High efficiency thermal insulation.
• Electric stirrer with stainless steel shaft and propeller.
• Thermally insulated bath cover with two holes for Cannon Fenske or Ubbelohde capillary viscometers. Control thermometer jacket placed between the two capillary holes.
• Stainless steel heater: while the compressor runs continuously, the heater, piloted by the electronic thermoregulator, compensates the heat subtracted by the compressor;
• Single stage (double stage for the -65 °C model) air cooled cooling compressor,: both single and double stage circuits are filled with CFC/HCFC-free gas.
• High precision electronic thermostat. Probe: PT100 RTD. The regulation accuracy is ± 0.01°C.
• Digital setting of the desired bath temperature with 0.01 °C accuracy.
• Safety devices against overheating and low-level.
• For 220 V/50 Hz connections: 1500 W power consumption.
• English written user manual.
• Dimensions for the benchtop model (l x w x h): 84 x 64 x 75 cm. Weight: 105 kg. One wooden crate dimensions (l x w x h): 100 x 80 x 100 cm. Shipping weight: 160 kg.
• Dimensions for the floor-mounted model (l x w x h): 75 x 75 x 120 cm. Weight: 180 kg. One wooden crate dimensions (l x w x h): 90 x 90 x 145 cm. Shipping weight: 250 kg.
• All models CE marked. Floor mounted versions also available.

AD0445-200        Apparatus with working range from +50°C down to -25 °C

AD0445-210        Apparatus for temperature from +50°C down to -45 °C

AD0445-220        Apparatus for temperature from +50°C down to -65 °C

Note: add suffix F for floor mounted version

 

ACCESSORIES

AD0445-A00        Battery chronograph

AD0445-A01        Portable digital thermometer with PT100 probe

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

Portable digital thermometer and glass thermometers can be supplied with official certificate

CONSUMABLES

TA072C-N00       ASTM 72C thermometer (-19.4°C/-16.6°C)

TA073C-N00       ASTM 73C thermometer (-41.4°C/-38.5°C)

TA074C-N00       ASTM 74C thermometer (-55.4°C/-52.6°C)

TA126C-N00       ASTM 126C thermometer (-27.4°C/-24.6°C)

TA127C-N00       ASTM 127C thermometer (-21.4°C/-18.6°C)

TA128C-N00       ASTM 128C thermometer (-1.4°C/+1.4°C)

AD0445-C00        Cannon-Fenske capillary holder

AD0445-C01        Ubbelohde capillary holder

The apparatus consists of a benchtop case containing a five-place steel furnace. It can reach temperatures up to 600 °C.

• Enamel finished steel case, benchtop version.
• Steel block heater, with five wells 25.45 mm diameter, 76 mm depth with hemispherical bottom.
• Microprocessor controlled thermoregulator with PID action and built-in digital display 1 °C accuracy showing the temperature and the set-point. Four buttons easy-to-use keyboard to preset working temperature. Probe: stainless steel coated type K thermocouple. Regulation accuracy: ±1°C.
• Working range: from ambient to 600°C.
• Coaxial heater with ceramic supports, SSR controlled.
• Stainless steel forceps for coking bulbs handling.
• Safety devices against overheating.
• English written user manual with installation instructions.
• For 220 V/50 Hz connections: 1500 W power consumption.
• Dimensions (l x w x h): 450 x 450 x 600 mm. Weight: 50 kg.
• CE marked.

AD0524-100        Apparatus

ACCESSORIES

AD0524-A00        Stainless steel control bulb

AD0524-A01        Type K thermocouple for control bulb

AD0524-A02        Digital indicator

AD0524-A03        Stand for holding and filling the bulbs

CAL001               PT100 simulator

CAL002               Officially certified PT100 simulator

CONSUMABLES

AD0524-C00       Pyrex glass coking bulb

AD0524-C01       5 cc syringe

AD0524-C02       10 cc syringe

The apparatus consists of a floor mounted water bath with a support for three vapour pressure cylinders.

• Enamel finished steel case.
• Stainless steel water bath suitable for the immersion of three vessels. Drain cock on the rear of the apparatus.
• Electric stirrer complete with stainless steel shaft.
• Electronic temperature control (proportional and derivative) obtained using a microprocessor controlled thermoregulator. with built-in digital display 0.1°C accuracy. The probe is a PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 50°C.
• Stainless steel heater.
• Safety device that cuts off the power supply and lights a lamp on the control panel in case of overheating of the liquid in the bath or lowering of the water level.
• Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 1000 W.
• Dimensions (l x w x h ): mm 500 x 300 x 850 approx.  Weight 50 kg approx.
• CE marked.

AD0323-100        Apparatus

 

ACCESSORIES

AD0323-A00        Reid V.P. vessel

AD0323-A01        Reid V.P. vessel  for sampling under pressure

AD0323-A02        Mercury manometer (for checking gauge)

AD0323-A03        Bourdon type spring gage stainless steel Ø 150 mm,   range 0/1 Kg/cm2 -  accuracy 1% f.s. range 0-1 Kg/cm2

AD0323-A04        Bourdon type spring gage stainless steel Ø 150 mm, range 0/1 Kg/cm2 -  accuracy 1% f.s. range 0-2.5 Kg/cm2

AD0323-A05   Bourdon type spring gage stainless steel Ø 150 mm, range 0/1 Kg/cm2 -  accuracy 1% f.s. range 0-4 Kg/cm2

AD0323-A06     Bourdon type spring gage stainless steel Ø 150 mm, range 0/1 Kg/cm2 -  accuracy 1% f.s. range 0-0.4 bar, accuracy 1.6% (membrane type)

AD0323-A07      Gage calibration device

AD0323-A10      Digital gage (scale -1 to +3 bar with possibility to commute to psi, kg/cm2 and kPa – +/- 0.1 F.S. accuracy)

CAL001              PT100 simulator

CAL002              Officially certified PT100 simulator

CONSUMABLES

AD0323-C00       Pack of 10 O-ring seals to connect air chamber to pressure gage

AD0323-C01       Pack of 10 O-ring seals to connect air to liquid chamber

TA058C-N00       ASTM 58C thermometer (-34°C/+49°C)

The apparatus consists of a benchtop case containing a dry block heater or a stainless steel tank and a support for the stirrer motors. Each position is equipped with an independent motor: in this way it is possible to use single positions and leave turned off the motors of the positions not used.

• Enamel finished benchtop steel case.
• Stainless steel tank or aluminium block heater with  jackets for glassware.
• Electric stirrer in the versions with oil bath.
• Stainless steel heater.
• Electric stirrer motors, one for each position: complete with pulleys, belts and ball bearing mounted spindles.
• Stainless steel shafts: the shafts can be lifted to insert the glassware.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy. Temperature probe: PT100 RTD.
• Safety device against overheating (and low-level in the versions with oil bath.
• Easy access control box containing all the electronics: anodized aluminium control panel with English written indications.
• English written user manual.
• For 220 V/50 Hz connection: 600 W power consumption.
• CE marked.
• Two, four and six-unit apparatus available.
• Glassware, covers, specimens, specimen holders not included.

AD0665-100        Two-unit apparatus, oil bath. Dimensions (l x w x h): mm 540 x 350 x 720. Weight: 35 kg approx.

AD0665-110        Two-unit apparatus, aluminium block. Dimensions (l x w x h): mm 640 x 350 x 720. Weight: 50 kg approx.

AD0665-120        Four-unit apparatus, oil bath. Dimensions (l x w x h): mm 720 x 350 x 720. Weight: 55 kg approx.

AD0665-130        Four-unit apparatus, aluminium block. Dimensions (l x w x h): mm 720 x 350 x 720. Weight: 60 kg approx.

AD0665-140        Six-unit apparatus, oil bath. Dimensions (l x w x h): mm 900 x 350 x 720. Weight: 75 kg approx.

AD0665-150        Six-unit apparatus, aluminium block. Dimensions (l x w x h): mm 900 x 350 x 720. Weight: 80 kg approx.

 

ACCESSORIES

AD0665-A00        Specimen grinding equipment

AD0665-A01        Blade for heavier than water fluids

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD0665-C00        Steel specimen

AD0665-C01        Perspex specimen holder

AD0665-C02        PTFE specimen holder

AD0665-C03        Pyrex beaker, 400 ml

AD0665-C04        Acrylic cover for beaker

AD0665-C05        PTFE cover

TA009C-N00       ASTM 9C thermometer (-5°C/+110°C)

The apparatus consists of a floor mounted case containing a stainless steel tank and the rotating mechanism. A control box located on the right side contains all the electronics.

• Enamel finished case, floor mounted version with swivelling castors.
• Stainless steel tank complete with drain tube and valve.
• Device for automatic adjustment of the water level.
• Stainless steel heaters: dedicated switch for the auxiliary heater.
• Ring diffuser complete with 20 Alundum air diffuser stones.
• Air supply line consisting in trap and filter, pressure regulator, 0-400 kPa gage, high precision 250 mm scale flowmeter (scale 0-1200 l/h) and glass tower and the air pump.
• Stainless steel rotating stage for 0.33 rpm speed. Externally mounted gear reduced motor.
• Drip pan mounted under the rotating stage to catch oil and condensed water dripping from the panels.
• Stainless steel cover with two layers of desized cotton cloth.
• Microprocessor controlled thermoregulator with built-in digital thermometer 0.1 °C accuracy. The probe is a PT100 RTD. Regulation accuracy ± 0.5 °C at the working temperature of 48.9 °C.
• Safety device against overheating and low-level.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 1500 W.
• Dimensions: mm 850 x 750 x 1100. Weight: 140 kg approx.
• CE marked

AD1748-100        Apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1748-C00        Set of 33 steel specimens

AD1748-C01        Blank specimen (dummy panel)

AD1748-C02        Silicon carbide paper, 240 grit (pack of 12 sheets)

AD1748-C03        Set of 20 Alundum air diffusers

AD1748-C04        Airplane cloth

TA009C-N00       ASTM 9C thermometer (-5°C/+110°C)

The apparatus, suitable for the execution of the test at 50°C, consists of a steel case containing a stainless steel bath with a four-hole cover for the test tubes and a manifold for connecting water to the condensers.

• Enamel finished benchtop steel case.
• Stainless steel inner bath with a four-hole cover for the test tubes.
• Manifold for connecting in parallel four condensers "cold finger" type.
• Electrical stirrer.
• Stainless steel heater.
• Electronic temperature control PID via a microprocessor controlled thermoregulator with built-in temperature display 0.1°C accuracy. The probe is a Pt100 RTD class 1/3 DIN: regulation accuracy ± 0.1°C.
• Safety devices that cut off the power supply and light a lamp on the control panel in case of overheating or lowering of the liquid level in the bath.
• Easy access control box on the right side of the apparatus containing all the electronic and electrical components: aluminium control panel with english written indications.
• English written user manual.
• For 220/50Hz connections. Power consumption 1200W.
• Dimensions (l x w x h): 600 x 400 x 900 approx. Weight 60 kg approx.
• CE marked.

IP0227-100          Four-place unit

IP0227-110          Six-place unit

IP0227-120          Eight-place unit

ACCESSORIES

IP0227-A00          ASTM comparative table

IP0227-A01          Strip vise for four strips

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

IP0227-C00         Amber-glass sample container

IP0227-C01         Amber-glass condenser

IP0227-C02         Silver strip support

IP0227-C03         Silver strip

IP0227-C04         Pack of 12 abrasive paper sheets, 240 grit

IP0227-C05         Pack of 12 abrasive paper sheets, 150 grit

IP0227-C06         Silicone carbide powder, 150 grit, 0.5 kg

TA012C-N00       ASTM 12C thermometer (-20°C/+102°C)

Specifications may vary without notice.

The apparatus consists of a floor mounted water bath with a support for three vapour pressure cylinders.

• Enamel finished steel case.
• Stainless steel water bath suitable for the immersion of three vessels. Drain cock on the rear of the apparatus.
• Electric stirrer.
• Stainless steel heater.
• Microprocessor thermoregulator with built-in digital display 0.1°C accuracy. The probe is a PT100 RTD. Regulation accuracy ± 0.1°C. Working range: from ambient to 80°C.
• Safety device that cuts off the power supply and lights a lamp on the control panel in case of overheating of the liquid in the bath or lowering of the water level.
• Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 1000 W.
• Dimensions (l x w x h ): mm 500 x 300 x 850 approx.  Weight 50 kg approx.
• CE marked.

AD1267-100        Apparatus

ACCESSORIES

AD1267-A00        LPG vapor pressure cylinder

AD1267-A01        33 1/3% lower chamber

AD1267-A02        Pressure gage Bourdon type spring gage Ø 114 mm, range 0/100 psi

AD1267-A03        As above, range 0/300 psi

AD1267-A04        As above, range 0/600 psi

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1267-C00        Gasket (to connect air chamber to pressure gage).Pack of 10

AD1267-C01        Gasket (to connect upper chamber to straight through valve). Pack of 20

AD1267-C02        Gasket (to connect lower chamber to straight through valve). Pack of 20

TA018C-N00       ASTM 18C thermometer (+34/+42°C)

TA065C-N00       ASTM 65C thermometer (+50/+80°C)

The apparatus consists of a steel frame supporting the control box, the jar and an electric lift that permits to move the stirrer blade up and down in the test cylinder. The speed of the stirrer is continuously showed on a digital tachometer.

• Borosilicate glass jar, 250 mm deep, mounted on a enamel finished benchtop steel frame.
• Anodized aluminium cover with six-position turntable for the insertion of the cylinders containing the samples: a positioning device permits to locate the cylinders exactly below the blade of the sample stirrer, avoiding breakings due to positioning mistakes.
• Electric lifting device for the stirrer support.
• Electric bath stirrer.
• Stainless steel heater.
• Electric sample stirrer.
• Digital tachometer which continuously shows the stirrer speed.
• Electronic timer which automatically stops the sample stirrer after 5 minutes stirring.
• Microprocessor controlled thermoregulator, PID action with built-in digital display 0.1°C accuracy. Probe: PT100 RTD. Regulation accuracy ± 0.1°C.
• Working range: from ambient to 100°C.
• Safety devices against overheating and low-level.
• Easy access control box placed on the right side of the apparatus containing all the electronics: anodized aluminium control panel with english written indications.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption 800 W.
• Dimensions (l x w x h): mm 500 x 460 x 960 approx. Weight: kg 40 approx.
• CE marked.

AD1401-100        Apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD1401-C00        Graduate cylinder, Pyrex glass

TA009C-N00       ASTM 9C thermometer (-5°C/+110°C)

TA019C-N00       ASTM 19C thermometer (+49°C/+57°C)

TA021C-N00       ASTM 21C thermometer (+79°C/+87°C)